| Server IP : 103.119.228.120 / Your IP : 18.119.122.140 Web Server : Apache System : Linux v8.techscape8.com 3.10.0-1160.119.1.el7.tuxcare.els2.x86_64 #1 SMP Mon Jul 15 12:09:18 UTC 2024 x86_64 User : nobody ( 99) PHP Version : 5.6.40 Disable Function : shell_exec,symlink,system,exec,proc_get_status,proc_nice,proc_terminate,define_syslog_variables,syslog,openlog,closelog,escapeshellcmd,passthru,ocinum cols,ini_alter,leak,listen,chgrp,apache_note,apache_setenv,debugger_on,debugger_off,ftp_exec,dl,dll,myshellexec,proc_open,socket_bind,proc_close,escapeshellarg,parse_ini_filepopen,fpassthru,exec,passthru,escapeshellarg,escapeshellcmd,proc_close,proc_open,ini_alter,popen,show_source,proc_nice,proc_terminate,proc_get_status,proc_close,pfsockopen,leak,apache_child_terminate,posix_kill,posix_mkfifo,posix_setpgid,posix_setsid,posix_setuid,dl,symlink,shell_exec,system,dl,passthru,escapeshellarg,escapeshellcmd,myshellexec,c99_buff_prepare,c99_sess_put,fpassthru,getdisfunc,fx29exec,fx29exec2,is_windows,disp_freespace,fx29sh_getupdate,fx29_buff_prepare,fx29_sess_put,fx29shexit,fx29fsearch,fx29ftpbrutecheck,fx29sh_tools,fx29sh_about,milw0rm,imagez,sh_name,myshellexec,checkproxyhost,dosyayicek,c99_buff_prepare,c99_sess_put,c99getsource,c99sh_getupdate,c99fsearch,c99shexit,view_perms,posix_getpwuid,posix_getgrgid,posix_kill,parse_perms,parsesort,view_perms_color,set_encoder_input,ls_setcheckboxall,ls_reverse_all,rsg_read,rsg_glob,selfURL,dispsecinfo,unix2DosTime,addFile,system,get_users,view_size,DirFiles,DirFilesWide,DirPrintHTMLHeaders,GetFilesTotal,GetTitles,GetTimeTotal,GetMatchesCount,GetFileMatchesCount,GetResultFiles,fs_copy_dir,fs_copy_obj,fs_move_dir,fs_move_obj,fs_rmdir,SearchText,getmicrotime MySQL : ON | cURL : ON | WGET : ON | Perl : ON | Python : ON | Sudo : ON | Pkexec : ON Directory : /usr/share/doc/openldap-devel-2.4.44/rfc/ |
Upload File : |
Network Working Group J. Strassner
Request for Comments: 3703 Intelliden Corporation
Category: Standards Track B. Moore
IBM Corporation
R. Moats
Lemur Networks, Inc.
E. Ellesson
February 2004
Policy Core Lightweight Directory Access Protocol (LDAP) Schema
Status of this Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (2004). All Rights Reserved.
Abstract
This document defines a mapping of the Policy Core Information Model
to a form that can be implemented in a directory that uses
Lightweight Directory Access Protocol (LDAP) as its access protocol.
This model defines two hierarchies of object classes: structural
classes representing information for representing and controlling
policy data as specified in RFC 3060, and relationship classes that
indicate how instances of the structural classes are related to each
other. Classes are also added to the LDAP schema to improve the
performance of a client's interactions with an LDAP server when the
client is retrieving large amounts of policy-related information.
These classes exist only to optimize LDAP retrievals: there are no
classes in the information model that correspond to them.
Table of Contents
1. Introduction ................................................. 2
2. The Policy Core Information Model ............................ 4
3. Inheritance Hierarchy for the PCLS ........................... 5
4. General Discussion of Mapping the Information Model to LDAP .. 6
4.1. Summary of Class and Association Mappings .............. 7
4.2. Usage of DIT Content and Structure Rules and Name Forms. 9
4.3. Naming Attributes in the PCLS .......................... 10
Strassner, et al. Standards Track [Page 1]
RFC 3703 Policy Core LDAP Schema February 2004
4.4. Rule-Specific and Reusable Conditions and Actions ...... 11
4.5. Location and Retrieval of Policy Objects in the
Directory .............................................. 16
4.5.1. Aliases and Other DIT-Optimization Techniques .. 19
5. Class Definitions ............................................ 19
5.1. The Abstract Class "pcimPolicy" ........................ 21
5.2. The Three Policy Group Classes ......................... 22
5.3. The Three Policy Rule Classes .......................... 23
5.4. The Class pcimRuleConditionAssociation ................. 30
5.5. The Class pcimRuleValidityAssociation .................. 32
5.6. The Class pcimRuleActionAssociation .................... 34
5.7. The Auxiliary Class pcimConditionAuxClass .............. 36
5.8. The Auxiliary Class pcimTPCAuxClass .................... 36
5.9. The Auxiliary Class pcimConditionVendorAuxClass ........ 40
5.10. The Auxiliary Class pcimActionAuxClass ................. 41
5.11. The Auxiliary Class pcimActionVendorAuxClass ........... 42
5.12. The Class pcimPolicyInstance ........................... 43
5.13. The Auxiliary Class pcimElementAuxClass ................ 44
5.14. The Three Policy Repository Classes .................... 45
5.15. The Auxiliary Class pcimSubtreesPtrAuxClass ............ 46
5.16. The Auxiliary Class pcimGroupContainmentAuxClass ....... 48
5.17. The Auxiliary Class pcimRuleContainmentAuxClass ........ 49
6. Extending the Classes Defined in This Document ............... 50
6.1. Subclassing pcimConditionAuxClass and pcimActionAuxClass 50
6.2. Using the Vendor Policy Attributes ..................... 50
6.3. Using Time Validity Periods ............................ 51
7. Security Considerations ...................................... 51
8. IANA Considerations .......................................... 53
8.1. Object Identifiers ..................................... 53
8.2. Object Identifier Descriptors .......................... 53
9. Acknowledgments .............................................. 56
10. Appendix: Constructing the Value of orderedCIMKeys .......... 57
11. References ................................................... 58
11.1. Normative References ................................... 58
11.2. Informative References ................................. 59
12. Authors' Addresses ........................................... 60
13. Full Copyright Statement ..................................... 61
1. Introduction
This document takes as its starting point the object-oriented
information model for representing information for representing and
controlling policy data as specified in [1]. Lightweight Directory
Access Protocol (LDAP) [2] implementers, please note that the use of
the term "policy" in this document does not refer to the use of the
term "policy" as defined in X.501 [4]. Rather, the use of the term
"policy" throughout this document is defined as follows:
Strassner, et al. Standards Track [Page 2]
RFC 3703 Policy Core LDAP Schema February 2004
Policy is defined as a set of rules to administer, manage, and
control access to network resources.
This work is currently under joint development in the IETF's Policy
Framework working group and in the Policy working group of the
Distributed Management Task Force (DMTF). This model defines two
hierarchies of object classes: structural classes representing policy
information and control of policies, and relationship classes that
indicate how instances of the structural classes are related to each
other. In general, both of these class hierarchies will need to be
mapped to a particular data store.
This document defines the mapping of these information model classes
to a directory that uses LDAP as its access protocol. Two types of
mappings are involved:
- For the structural classes in the information model, the
mapping is basically one-for-one: information model classes map
to LDAP classes, information model properties map to LDAP
attributes.
- For the relationship classes in the information model,
different mappings are possible. In this document, the Policy
Core Information Model's (PCIM's) relationship classes and
their properties are mapped in three ways: to LDAP auxiliary
classes, to attributes representing distinguished name (DN)
references, and to superior-subordinate relationships in the
Directory Information Tree (DIT).
Implementations that use an LDAP directory as their policy repository
and want to implement policy information according to RFC 3060 [1]
SHALL use the LDAP schema defined in this document, or a schema that
subclasses from the schema defined in this document. The use of the
information model defined in reference [1] as the starting point
enables the inheritance and the relationship class hierarchies to be
extensible, such that other types of policy repositories, such as
relational databases, can also use this information.
This document fits into the overall framework for representing,
deploying, and managing policies being developed by the Policy
Framework Working Group.
The LDAP schema described in this document uses the prefix "pcim" to
identify its classes and attributes. It consists of ten very general
classes: pcimPolicy (an abstract class), three policy group classes
(pcimGroup, pcimGroupAuxClass, and pcimGroupInstance), three policy
rule classes (pcimRule, pcimRuleAuxClass, and pcimRuleInstance), and
three special auxiliary classes (pcimConditionAuxClass,
Strassner, et al. Standards Track [Page 3]
RFC 3703 Policy Core LDAP Schema February 2004
pcimTPCAuxClass, and pcimActionAuxClass). (Note that the
PolicyTimePeriodCondition auxiliary class defined in [1] would
normally have been named pcimTimePeriodConditionAuxClass, but this
name is too long for some directories. Therefore, we have
abbreviated this name to be pcimTPCAuxClass).
The mapping for the PCIM classes pcimGroup and pcimRule is designed
to be as flexible as possible. Three classes are defined for these
two PCIM classes. First, an abstract superclass is defined that
contains all required properties of each PCIM class. Then, both an
auxiliary class as well as a structural class are derived from the
abstract superclass. This provides maximum flexibility for the
developer.
The schema also contains two less general classes:
pcimConditionVendorAuxClass and pcimActionVendorAuxClass. To achieve
the mapping of the information model's relationships, the schema also
contains two auxiliary classes: pcimGroupContainmentAuxClass and
pcimRuleContainmentAuxClass. Capturing the distinction between
rule-specific and reusable policy conditions and policy actions
introduces seven other classes: pcimRuleConditionAssociation,
pcimRuleValidityAssociation, pcimRuleActionAssociation,
pcimPolicyInstance, and three policy repository classes
(pcimRepository, pcimRepositoryAuxClass, and pcimRepositoryInstance).
Finally, the schema includes two classes (pcimSubtreesPtrAuxClass and
pcimElementAuxClass) for optimizing LDAP retrievals. In all, the
schema contains 23 classes.
Within the context of this document, the term "PCLS" (Policy Core
LDAP Schema) is used to refer to the LDAP class definitions that this
document contains. The term "PCIM" refers to classes defined in [1].
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119 [10].
2. The Policy Core Information Model
This document contains an LDAP schema representing the classes
defined in the companion document "Policy Core Information
Model -- Version 1 Specification" [1]. Other documents may
subsequently be produced, with mappings of this same PCIM to other
storage technologies. Since the detailed semantics of the PCIM
classes appear only in [1], that document is a prerequisite for
reading and understanding this document.
Strassner, et al. Standards Track [Page 4]
RFC 3703 Policy Core LDAP Schema February 2004
3. Inheritance Hierarchy for the PCLS
The following diagram illustrates the class hierarchy for the LDAP
Classes defined in this document:
top
|
+--dlm1ManagedElement (abstract)
| |
| +--pcimPolicy (abstract)
| | |
| | +--pcimGroup (abstract)
| | | |
| | | +--pcimGroupAuxClass (auxiliary)
| | | |
| | | +--pcimGroupInstance (structural)
| | |
| | +--pcimRule (abstract)
| | | |
| | | +--pcimRuleAuxClass (auxiliary)
| | | |
| | | +--pcimRuleInstance (structural)
| | |
| | +--pcimRuleConditionAssociation (structural)
| | |
| | +--pcimRuleValidityAssociation (structural)
| | |
| | +--pcimRuleActionAssociation (structural)
| | |
| | +--pcimPolicyInstance (structural)
| | |
| | +--pcimElementAuxClass (auxiliary)
| |
| +--dlm1ManagedSystemElement (abstract)
| |
| +--dlm1LogicalElement (abstract)
| |
| +--dlm1System (abstract)
| |
| +--dlm1AdminDomain (abstract)
| |
| +--pcimRepository (abstract)
| |
| +--pcimRepositoryAuxClass (auxiliary)
Strassner, et al. Standards Track [Page 5]
RFC 3703 Policy Core LDAP Schema February 2004
top
| |
| +--pcimRepositoryInstance
| (structural)
|
+--pcimConditionAuxClass (auxiliary)
| |
| +---pcimTPCAuxClass (auxiliary)
| |
| +---pcimConditionVendorAuxClass (auxiliary)
|
+--pcimActionAuxClass (auxiliary)
| |
| +---pcimActionVendorAuxClass (auxiliary)
|
+--pcimSubtreesPtrAuxClass (auxiliary)
|
+--pcimGroupContainmentAuxClass (auxiliary)
|
+--pcimRuleContainmentAuxClass (auxiliary)
Figure 1. LDAP Class Inheritance Hierarchy for the PCLS
4. General Discussion of Mapping the Information Model to LDAP
The classes described in Section 5 below contain certain
optimizations for a directory that uses LDAP as its access protocol.
One example of this is the use of auxiliary classes to represent some
of the associations defined in the information model. Other data
stores might need to implement these associations differently. A
second example is the introduction of classes specifically designed
to optimize retrieval of large amounts of policy-related data from a
directory. This section discusses some general topics related to the
mapping from the information model to LDAP.
The remainder of this section will discuss the following topics.
Section 4.1 will discuss the strategy used in mapping the classes and
associations defined in [1] to a form that can be represented in a
directory that uses LDAP as its access protocol. Section 4.2
discusses DIT content and structure rules, as well as name forms.
Section 4.3 describes the strategy used in defining naming attributes
for the schema described in Section 5 of this document. Section 4.4
defines the strategy recommended for locating and retrieving
PCIM-derived objects in the directory.
Strassner, et al. Standards Track [Page 6]
RFC 3703 Policy Core LDAP Schema February 2004
4.1. Summary of Class and Association Mappings
Fifteen of the classes in the PCLS come directly from the nine
corresponding classes in the information model. Note that names of
classes begin with an upper case character in the information model
(although for CIM in particular, case is not significant in class and
property names), but with a lower case character in LDAP. This is
because although LDAP doesn't care, X.500 doesn't allow class names
to begin with an uppercase character. Note also that the prefix
"pcim" is used to identify these LDAP classes.
+---------------------------+-------------------------------+
| Information Model | LDAP Class(es) |
+---------------------------+-------------------------------+
+---------------------------+-------------------------------+
| Policy | pcimPolicy |
+---------------------------+-------------------------------+
| PolicyGroup | pcimGroup |
| | pcimGroupAuxClass |
| | pcimGroupInstance |
+---------------------------+-------------------------------+
| PolicyRule | pcimRule |
| | pcimRuleAuxClass |
| | pcimRuleInstance |
+---------------------------+-------------------------------+
| PolicyCondition | pcimConditionAuxClass |
+---------------------------+-------------------------------+
| PolicyAction | pcimActionAuxClass |
+---------------------------+-------------------------------+
| VendorPolicyCondition | pcimConditionVendorAuxClass |
+---------------------------+-------------------------------+
| VendorPolicyAction | pcimActionVendorAuxClass |
+---------------------------+-------------------------------+
| PolicyTimePeriodCondition | pcimTPCAuxClass |
+---------------------------+-------------------------------+
| PolicyRepository | pcimRepository |
| | pcimRepositoryAuxClass |
| | pcimRepositoryInstance |
+---------------------------+-------------------------------+
Figure 2. Mapping of Information Model Classes to LDAP
The associations in the information model map to attributes that
reference DNs (Distinguished Names) or to Directory Information Tree
(DIT) containment (i.e., superior-subordinate relationships) in LDAP.
Two of the attributes that reference DNs appear in auxiliary classes,
which allow each of them to represent several relationships from the
information model.
Strassner, et al. Standards Track [Page 7]
RFC 3703 Policy Core LDAP Schema February 2004
+----------------------------------+----------------------------------+
| Information Model Association | LDAP Attribute / Class |
+-----------------------------------+---------------------------------+
+-----------------------------------+---------------------------------+
| PolicyGroupInPolicyGroup | pcimGroupsAuxContainedSet in |
| | pcimGroupContainmentAuxClass |
+-----------------------------------+---------------------------------+
| PolicyRuleInPolicyGroup | pcimRulesAuxContainedSet in |
| | pcimRuleContainmentAuxClass |
+-----------------------------------+---------------------------------+
| PolicyConditionInPolicyRule | DIT containment or |
| | pcimRuleConditionList in |
| | pcimRule or |
| | pcimConditionDN in |
| | pcimRuleConditionAssociation |
+-----------------------------------+---------------------------------+
| PolicyActionInPolicyRule | DIT containment or |
| | pcimRuleActionList in |
| | pcimRule or |
| | pcimActionDN in |
| | pcimRuleActionAssociation |
+-----------------------------------+---------------------------------+
| PolicyRuleValidityPeriod | pcimRuleValidityPeriodList |
| | in pcimRule or (if reusable) |
| | referenced through the |
| | pcimTimePeriodConditionDN in |
| | pcimRuleValidityAssociation |
+-----------------------------------+---------------------------------+
| PolicyConditionInPolicyRepository | DIT containment |
+-----------------------------------+---------------------------------+
| PolicyActionInPolicyRepository | DIT containment |
+-----------------------------------+---------------------------------+
| PolicyRepositoryInPolicyRepository| DIT containment |
+-----------------------------------+---------------------------------+
Figure 3. Mapping of Information Model Associations to LDAP
Of the remaining classes in the PCLS, two (pcimElementAuxClass and
pcimSubtreesPtrAuxClass) are included to make navigation through the
DIT and retrieval of the entries found there more efficient. This
topic is discussed below in Section 4.5.
The remaining four classes in the PCLS, pcimRuleConditionAssociation,
pcimRuleValidityAssociation, pcimRuleActionAssociation, and
pcimPolicyInstance, are all involved with the representation of
policy conditions and policy actions in an LDAP directory. This
topic is discussed below in Section 4.4.
Strassner, et al. Standards Track [Page 8]
RFC 3703 Policy Core LDAP Schema February 2004
4.2. Usage of DIT Content and Structure Rules and Name Forms
There are three powerful tools that can be used to help define
schemata. The first, DIT content rules, is a way of defining the
content of an entry for a structural object class. It can be used to
specify the following characteristics of the entry:
- additional mandatory attributes that the entries are required
to contain
- additional optional attributes the entries are allowed to
contain
- the set of additional auxiliary object classes that these
entries are allowed to be members of
- any optional attributes from the structural and auxiliary
object class definitions that the entries are required to
preclude
DIT content rules are NOT mandatory for any structural object class.
A DIT structure rule, together with a name form, controls the
placement and naming of an entry within the scope of a subschema.
Name forms define which attribute type(s) are required and are
allowed to be used in forming the Relative Distinguished Names (RDNs)
of entries. DIT structure rules specify which entries are allowed to
be superior to other entries, and hence control the way that RDNs are
added together to make DNs.
A name form specifies the following:
- the structural object class of the entries named by this name
form
- attributes that are required to be used in forming the RDNs of
these entries
- attributes that are allowed to be used in forming the RDNs of
these entries
- an object identifier to uniquely identify this name form
Note that name forms can only be specified for structural object
classes. However, every entry in the DIT must have a name form
controlling it.
Unfortunately, current LDAP servers vary quite a lot in their support
of these features. There are also three crucial implementation
points that must be followed. First, X.500 use of structure rules
requires that a structural object class with no superior structure
rule be a subschema administrative point. This is exactly NOT what
we want for policy information. Second, when an auxiliary class is
subclassed, if a content rule exists for the structural class that
Strassner, et al. Standards Track [Page 9]
RFC 3703 Policy Core LDAP Schema February 2004
the auxiliary class refers to, then that content rule needs to be
augmented. Finally, most LDAP servers unfortunately do not support
inheritance of structure and content rules.
Given these concerns, DIT structure and content rules have been
removed from the PCLS. This is because, if included, they would be
normative references and would require OIDs. However, we don't want
to lose the insight gained in building the structure and content
rules of the previous version of the schema. Therefore, we describe
where such rules could be used in this schema, what they would
control, and what their effect would be.
4.3. Naming Attributes in the PCLS
Instances in a directory are identified by distinguished names (DNs),
which provide the same type of hierarchical organization that a file
system provides in a computer system. A distinguished name is a
sequence of RDNs. An RDN provides a unique identifier for an
instance within the context of its immediate superior, in the same
way that a filename provides a unique identifier for a file within
the context of the folder in which it resides.
To preserve maximum naming flexibility for policy administrators,
three optional (i.e., "MAY") naming attributes have been defined.
They are:
- Each of the structural classes defined in this schema has its
own unique ("MAY") naming attribute. Since the naming
attributes are different, a policy administrator can, by using
these attributes, guarantee that there will be no name
collisions between instances of different classes, even if the
same value is assigned to the instances' respective naming
attributes.
- The LDAP attribute cn (corresponding to X.500's commonName) is
included as a MAY attribute in the abstract class pcimPolicy,
and thus by inheritance in all of its subclasses. In X.500,
commonName typically functions as an RDN attribute, for naming
instances of many classes (e.g., X.500's person class).
- A special attribute is provided for implementations that expect
to map between native CIM and LDAP representations of policy
information. This attribute, called orderedCimKeys, is defined
in the class dlm1ManagedElement [6]. The value of this
attribute is derived algorithmically from values that are
already present in a CIM policy instance. The normative
reference for this algorithm is contained in [6]. See the
appendix of this document for a description of the algorithm.
Strassner, et al. Standards Track [Page 10]
RFC 3703 Policy Core LDAP Schema February 2004
Since any of these naming attributes MAY be used for naming an
instance of a PCLS class, implementations MUST be able to accommodate
instances named in any of these ways.
Note that it is recommended that two or more of these attributes
SHOULD NOT be used together to form a multi-part RDN, since support
for multi-part RDNs is limited among existing directory
implementations.
4.4. Rule-Specific and Reusable Conditions and Actions
The PCIM [1] distinguishes between two types of policy conditions and
policy actions: those associated with a single policy rule, and
those that are reusable, in the sense that they may be associated
with more than one policy rule. While there is no inherent
functional difference between a rule-specific condition or action and
a reusable one, there is both a usage, as well as, an implementation
difference between them.
Defining a condition or action as reusable vs. rule-specific reflects
a conscious decision on the part of the administrator in defining how
they are used. In addition, there are variations that reflect
implementing rule-specific vs. reusable policy conditions and actions
and how they are treated in a policy repository. The major
implementation differences between a rule-specific and a reusable
condition or action are delineated below:
1. It is natural for a rule-specific condition or action to be
removed from the policy repository at the same time the rule is.
It is just the opposite for reusable conditions and actions.
This is because the condition or action is conceptually attached
to the rule in the rule-specific case, whereas it is referenced
(e.g., pointed at) in the reusable case. The persistence of a
pcimRepository instance is independent of the persistence of a
pcimRule instance.
2. Access permissions for a rule-specific condition or action are
usually identical to those for the rule itself. On the other
hand, access permissions of reusable conditions and actions must
be expressible without reference to a policy rule.
3. Rule-specific conditions and actions require fewer accesses,
because the conditions and actions are "attached" to the rule.
In contrast, reusable conditions and actions require more
accesses, because each condition or action that is reusable
requires a separate access.
4. Rule-specific conditions and actions are designed for use by a
single rule. As the number of rules that use the same
rule-specific condition increase, subtle problems are created
(the most obvious being how to keep the rule-specific conditions
Strassner, et al. Standards Track [Page 11]
RFC 3703 Policy Core LDAP Schema February 2004
and actions updated to reflect the same value). Reusable
conditions and actions lend themselves for use by multiple
independent rules.
5. Reusable conditions and actions offer an optimization when
multiple rules are using the same condition or action. This is
because the reusable condition or action only needs be updated
once, and by virtue of DN reference, the policy rules will be
automatically updated.
The preceding paragraph does not contain an exhaustive list of the
ways in which reusable and rule-specific conditions should be treated
differently. Its purpose is merely to justify making a semantic
distinction between rule-specific and reusable, and then reflecting
this distinction in the policy repository itself.
When the policy repository is realized in an LDAP-accessible
directory, the distinction between rule-specific and reusable
conditions and actions is realized via placement of auxiliary classes
and via DIT containment. Figure 4 illustrates a policy rule Rule1
with one rule-specific condition CA and one rule-specific action AB.
+-----+
|Rule1|
| |
+-----|- -|-----+
| +-----+ |
| * * |
| * * |
| **** **** |
| * * |
v * * v
+--------+ +--------+
| CA+ca | | AB+ab |
+--------+ +--------+
+------------------------------+
|LEGEND: |
| ***** DIT containment |
| + auxiliary attachment |
| ----> DN reference |
+------------------------------+
Figure 4 Rule-Specific Policy Conditions and Actions
Strassner, et al. Standards Track [Page 12]
RFC 3703 Policy Core LDAP Schema February 2004
Because the condition and action are specific to Rule1, the auxiliary
classes ca and ab that represent them are attached, respectively, to
the structural classes CA and AB. These structural classes represent
not the condition ca and action ab themselves, but rather the
associations between Rule1 and ca, and between Rule1 and ab.
As Figure 4 illustrates, Rule1 contains DN references to the
structural classes CA and AB that appear below it in the DIT. At
first glance it might appear that these DN references are
unnecessary, since a subtree search below Rule1 would find all of the
structural classes representing the associations between Rule1 and
its conditions and actions. Relying only on a subtree search,
though, runs the risk of missing conditions or actions that should
have appeared in the subtree, but for some reason did not, or of
finding conditions or actions that were inadvertently placed in the
subtree, or that should have been removed from the subtree, but for
some reason were not. Implementation experience has suggested that
many (but not all) of these risks are eliminated.
However, it must be noted that this comes at a price. The use of DN
references, as shown in Figure 4 above, thwarts inheritance of access
control information as well as existence dependency information. It
also is subject to referential integrity considerations. Therefore,
it is being included as an option for the designer.
Figure 5 illustrates a second way of representing rule-specific
conditions and actions in an LDAP-accessible directory: attachment of
the auxiliary classes directly to the instance representing the
policy rule. When all of the conditions and actions are attached to
a policy rule in this way, the rule is termed a "simple" policy rule.
When conditions and actions are not attached directly to a policy
rule, the rule is termed a "complex" policy rule.
+-----------+
|Rule1+ca+ab|
| |
+-----------+
+------------------------------+
|LEGEND: |
| + auxiliary attachment |
+------------------------------+
Figure 5. A Simple Policy Rule
Strassner, et al. Standards Track [Page 13]
RFC 3703 Policy Core LDAP Schema February 2004
The simple/complex distinction for a policy rule is not all or
nothing. A policy rule may have its conditions attached to itself
and its actions attached to other entries, or it may have its actions
attached to itself and its conditions attached to other entries.
However, it SHALL NOT have either its conditions or its actions
attached both to itself and to other entries, with one exception: a
policy rule may reference its validity periods with the
pcimRuleValidityPeriodList attribute, but have its other conditions
attached to itself.
The tradeoffs between simple and complex policy rules are between the
efficiency of simple rules and the flexibility and greater potential
for reuse of complex rules. With a simple policy rule, the semantic
options are limited:
- All conditions are ANDed together. This combination can be
represented in two ways in the Disjunctive Normal Form (DNF)/
Conjunctive Normal Form (CNF) (please see [1] for definitions of
these terms) expressions characteristic of policy conditions: as
a DNF expression with a single AND group, or as a CNF expression
with multiple single-condition OR groups. The first of these is
arbitrarily chosen as the representation for the ANDed conditions
in a simple policy rule.
- If multiple actions are included, no order can be specified for
them.
If a policy administrator needs to combine conditions in some other
way, or if there is a set of actions that must be ordered, then the
only option is to use a complex policy rule.
Finally, Figure 6 illustrates the same policy rule Rule1, but this
time its condition and action are reusable. The association classes
CA and AB are still present, and they are still DIT contained under
Rule1. But rather than having the auxiliary classes ca and ab
attached directly to the association classes CA and AB, each now
contains DN references to other entries to which these auxiliary
classes are attached. These other entries, CIA and AIB, are DIT
contained under RepositoryX, which is an instance of the class
pcimRepository. Because they are named under an instance of
pcimRepository, ca and ab are clearly identified as reusable.
Strassner, et al. Standards Track [Page 14]
RFC 3703 Policy Core LDAP Schema February 2004
+-----+ +-------------+
|Rule1| | RepositoryX |
+-|- -|--+ | |
| +-----+ | +-------------+
| * * | * *
| * * | * *
| *** **** | * *
| * * v * *
| * +---+ * *
| * |AB | +------+ *
v * | -|-------->|AIB+ab| *
+---+ +---+ +------+ *
|CA | +------+
| -|------------------------>|CIA+ca|
+---+ +------+
+------------------------------+
|LEGEND: |
| ***** DIT containment |
| + auxiliary attachment |
| ----> DN reference |
+------------------------------+
Figure 6. Reusable Policy Conditions and Actions
The classes pcimConditionAuxClass and pcimActionAuxClass do not
themselves represent actual conditions and actions: these are
introduced in their subclasses. What pcimConditionAuxClass and
pcimActionAuxClass do introduce are the semantics of being a policy
condition or a policy action. These are the semantics that all the
subclasses of pcimConditionAuxClass and pcimActionAuxClass inherit.
Among these semantics are those of representing either a
rule-specific or a reusable policy condition or policy action.
In order to preserve the ability to represent a rule-specific or a
reusable condition or action, as well as a simple policy rule, all
the subclasses of pcimConditionAuxClass and pcimActionAuxClass MUST
also be auxiliary classes.
Strassner, et al. Standards Track [Page 15]
RFC 3703 Policy Core LDAP Schema February 2004
4.5. Location and Retrieval of Policy Objects in the Directory
When a Policy Decision Point (PDP) goes to an LDAP directory to
retrieve the policy object instances relevant to the Policy
Enforcement Points (PEPs) it serves, it is faced with two related
problems:
- How does it locate and retrieve the directory entries that apply
to its PEPs? These entries may include instances of the PCLS
classes, instances of domain-specific subclasses of these
classes, and instances of other classes modeling such resources
as user groups, interfaces, and address ranges.
- How does it retrieve the directory entries it needs in an
efficient manner, so that retrieval of policy information from
the directory does not become a roadblock to scalability? There
are two facets to this efficiency: retrieving only the relevant
directory entries, and retrieving these entries using as few LDAP
calls as possible.
The placement of objects in the Directory Information Tree (DIT)
involves considerations other than how the policy-related objects
will be retrieved by a PDP. Consequently, all that the PCLS can do
is to provide a "toolkit" of classes to assist the policy
administrator as the DIT is being designed and built. A PDP SHOULD
be able to take advantage of any tools that the policy administrator
is able to build into the DIT, but it MUST be able to use a less
efficient means of retrieval if that is all it has available to it.
The basic idea behind the LDAP optimization classes is a simple one:
make it possible for a PDP to retrieve all the policy-related objects
it needs, and only those objects, using as few LDAP calls as
possible. An important assumption underlying this approach is that
the policy administrator has sufficient control over the underlying
DIT structure to define subtrees for storing policy information. If
the policy administrator does not have this level of control over DIT
structure, a PDP can still retrieve the policy-related objects it
needs individually. But it will require more LDAP access operations
to do the retrieval in this way. Figure 7 illustrates how LDAP
optimization is accomplished.
Strassner, et al. Standards Track [Page 16]
RFC 3703 Policy Core LDAP Schema February 2004
+-----+
---------------->| A |
DN reference to | | DN references to subtrees +---+
starting object +-----+ +-------------------------->| C |
| o--+----+ +---+ +---+
| o--+------------->| B | / \
+-----+ +---+ / \
/ \ / \ / ... \
/ \ / \
/ \ / ... \
Figure 7. Using the pcimSubtreesPtrAuxClass to Locate Policies
The PDP is configured initially with a DN reference to some entry in
the DIT. The structural class of this entry is not important; the
PDP is interested only in the pcimSubtreesPtrAuxClass attached to it.
This auxiliary class contains a multi-valued attribute with DN
references to objects that anchor subtrees containing policy-related
objects of interest to the PDP. Since pcimSubtreesPtrAuxClass is an
auxiliary class, it can be attached to an entry that the PDP would
need to access anyway - perhaps an entry containing initial
configuration settings for the PDP, or for a PEP that uses the PDP.
Once it has retrieved the DN references, the PDP will direct to each
of the objects identified by them an LDAP request that all entries in
its subtree be evaluated against the selection criteria specified in
the request. The LDAP-enabled directory then returns all entries in
that subtree that satisfy the specified criteria.
The selection criteria always specify that object class="pcimPolicy".
Since all classes representing policy rules, policy conditions, and
policy actions, both in the PCLS and in any domain-specific schema
derived from it, are subclasses of the abstract class policy, this
criterion evaluates to TRUE for all instances of these classes. To
accommodate special cases where a PDP needs to retrieve objects that
are not inherently policy-related (for example, an IP address range
object referenced by a subclass of pcimActionAuxClass representing
the DHCP action "assign from this address range"), the auxiliary
class pcimElementAuxClass can be used to "tag" an entry, so that it
will be found by the selection criterion "object class=pcimPolicy".
The approach described in the preceding paragraph will not work for
certain directory implementations, because these implementations do
not support matching of auxiliary classes in the objectClass
attribute. For environments where these implementations are expected
to be present, the "tagging" of entries as relevant to policy can be
Strassner, et al. Standards Track [Page 17]
RFC 3703 Policy Core LDAP Schema February 2004
accomplished by inserting the special value "POLICY" into the list of
values contained in the pcimKeywords attribute (provided by the
pcimPolicy class).
If a PDP needs only a subset of the policy-related objects in the
indicated subtrees, then it can be configured with additional
selection criteria based on the pcimKeywords attribute defined in the
pcimPolicy class. This attribute supports both standardized and
administrator- defined values. For example, a PDP could be
configured to request only those policy-related objects containing
the keywords "DHCP" and "Eastern US".
To optimize what is expected to be a typical case, the initial
request from the client includes not only the object to which its
"seed" DN references, but also the subtree contained under this
object. The filter for searching this subtree is whatever the client
is going to use later to search the other subtrees: object
class="pcimPolicy" or the presence of the keyword "POLICY", and/or
presence of a more specific value of pcimKeywords (e.g., "QoS Edge
Policy").
Returning to the example in Figure 7, we see that in the best case, a
PDP can get all the policy-related objects it needs, and only those
objects, with exactly three LDAP requests: one to its starting
object A to get the references to B and C, as well as the
policy-related objects it needs from the subtree under A, and then
one each to B and C to get all the policy-related objects that pass
the selection criteria with which it was configured. Once it has
retrieved all of these objects, the PDP can then traverse their
various DN references locally to understand the semantic
relationships among them. The PDP should also be prepared to find a
reference to another subtree attached to any of the objects it
retrieves, and to follow this reference first, before it follows any
of the semantically significant references it has received. This
recursion permits a structured approach to identifying related
policies. In Figure 7, for example, if the subtree under B includes
departmental policies and the one under C includes divisional
policies, then there might be a reference from the subtree under C to
an object D that roots the subtree of corporate-level policies.
A PDP SHOULD understand the pcimSubtreesPtrAuxClass class, SHOULD be
capable of retrieving and processing the entries in the subtrees it
references, and SHOULD be capable of doing all of this recursively.
The same requirements apply to any other entity needing to retrieve
policy information from the directory. Thus, a Policy Management
Tool that retrieves policy entries from the directory in order to
perform validation and conflict detection SHOULD also understand and
be capable of using the pcimSubtreesPtrAuxClass. All of these
Strassner, et al. Standards Track [Page 18]
RFC 3703 Policy Core LDAP Schema February 2004
requirements are "SHOULD"s rather than "MUST"s because an LDAP client
that doesn't implement them can still access and retrieve the
directory entries it needs. The process of doing so will just be
less efficient than it would have been if the client had implemented
these optimizations.
When it is serving as a tool for creating policy entries in the
directory, a Policy Management Tool SHOULD support creation of
pcimSubtreesPtrAuxClass entries and their references to object
instances.
4.5.1. Aliases and Other DIT-Optimization Techniques
Additional flexibility in DIT structure is available to the policy
administrator via LDAP aliasing and other techniques. Previous
versions of this document have used aliases. However, because
aliases are experimental, the use of aliases has been removed from
this version of this document. This is because the IETF has yet to
produce a specification on how aliases are represented in the
directory or how server implementations are to process aliases.
5. Class Definitions
The semantics for the policy information classes that are to be
mapped directly from the information model to an LDAP representation
are detailed in [1]. Consequently, all that this document presents
for these classes is the specification for how to do the mapping from
the information model (which is independent of repository type and
access protocol) to a form that can be accessed using LDAP. Remember
that some new classes needed to be created (that were not part of
[1]) to implement the LDAP mapping. These new LDAP-only classes are
fully documented in this document.
The formal language for specifying the classes, attributes, and DIT
structure and content rules is that defined in reference [3]. If
your implementation does not support auxiliary class inheritance, you
will have to list auxiliary classes in content rules explicitly or
define them in another (implementation-specific) way.
The following notes apply to this section in its entirety.
Note 1: in the following definitions, the class and attribute
definitions follow RFC 2252 [3] but they are line-wrapped to enhance
human readability.
Note 2: where applicable, the possibilities for specifying DIT
structure and content rules are noted. However, care must be taken
in specifying DIT structure rules. This is because X.501 [4] states
Strassner, et al. Standards Track [Page 19]
RFC 3703 Policy Core LDAP Schema February 2004
that an entry may only exist in the DIT as a subordinate to another
superior entry (the superior) if a DIT structure rule exists in the
governing subschema which:
1) indicates a name form for the structural object class of the
subordinate entry, and
2) either includes the entry's superior structure rule as a possible
superior structure rule, or
3) does not specify a superior structure rule.
If this last case (3) applies, then the entry is defined to be a
subschema administrative point. This is not what is desired.
Therefore, care must be taken in defining structure rules, and in
particular, they must be locally augmented.
Note 3: Wherever possible, both an equality and a substring matching
rule are defined for a particular attribute (as well as an ordering
match rule to enable sorting of matching results). This provides two
different choices for the developer for maximum flexibility.
For example, consider the pcimRoles attribute (section 5.3). Suppose
that a PEP has reported that it is interested in pcimRules for three
roles R1, R2, and R3. If the goal is to minimize queries, then the
PDP can supply three substring filters containing the three role
names.
These queries will return all of the pcimRules that apply to the PEP,
but they may also get some that do not apply (e.g., ones that contain
one of the roles R1, R2, or R3 and one or more other roles present in
a role-combination [1]).
Another strategy would be for the PDP to use only equality filters.
This approach eliminates the extraneous replies, but it requires the
PDP to explicitly build the desired role-combinations itself. It
also requires extra queries. Note that this approach is practical
only because the role names in a role combination are required to
appear in alphabetical order.
Note 4: in the following definitions, note that all LDAP matching
rules are defined in [3] and in [9]. The corresponding X.500
matching rules are defined in [8].
Note 5: some of the following attribute definitions specify
additional constraints on various data types (e.g., this integer has
values that are valid from 1..10). Text has been added to instruct
servers and applications what to do if a value outside of this range
Strassner, et al. Standards Track [Page 20]
RFC 3703 Policy Core LDAP Schema February 2004
is encountered. In all cases, if a constraint is violated, then the
policy rule SHOULD be treated as being disabled, meaning that
execution of the policy rule SHOULD be stopped.
5.1. The Abstract Class pcimPolicy
The abstract class pcimPolicy is a direct mapping of the abstract
class Policy from the PCIM. The class value "pcimPolicy" is also
used as the mechanism for identifying policy-related instances in the
Directory Information Tree. An instance of any class may be "tagged"
with this class value by attaching to it the auxiliary class
pcimElementAuxClass. Since pcimPolicy is derived from the class
dlm1ManagedElement defined in reference [6], this specification has a
normative dependency on that element of reference [6].
The class definition is as follows:
( 1.3.6.1.1.6.1.1 NAME 'pcimPolicy'
DESC 'An abstract class that is the base class for all classes
that describe policy-related instances.'
SUP dlm1ManagedElement
ABSTRACT
MAY ( cn $ dlmCaption $ dlmDescription $ orderedCimKeys $
pcimKeywords )
)
The attribute cn is defined in RFC 2256 [7]. The dlmCaption,
dlmDescription, and orderedCimKeys attributes are defined in [6].
The pcimKeywords attribute is a multi-valued attribute that contains
a set of keywords to assist directory clients in locating the policy
objects identified by these keywords. It is defined as follows:
( 1.3.6.1.1.6.2.3 NAME 'pcimKeywords'
DESC 'A set of keywords to assist directory clients in
locating the policy objects applicable to them.'
EQUALITY caseIgnoreMatch
ORDERING caseIgnoreOrderingMatch
SUBSTR caseIgnoreSubstringsMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
)
Strassner, et al. Standards Track [Page 21]
RFC 3703 Policy Core LDAP Schema February 2004
5.2. The Three Policy Group Classes
PCIM [1] defines the PolicyGroup class to serve as a generalized
aggregation mechanism, enabling PolicyRules and/or PolicyGroups to be
aggregated together. PCLS maps this class into three LDAP classes,
called pcimGroup, pcimGroupAuxClass, and pcimGroupInstance. This is
done in order to provide maximum flexibility for the DIT designer.
The class definitions for the three policy group classes are listed
below. These class definitions do not include attributes to realize
the PolicyRuleInPolicyGroup and PolicyGroupInPolicyGroup associations
from the PCIM. This is because a pcimGroup object refers to
instances of pcimGroup and pcimRule via, respectively, the attribute
pcimGroupsAuxContainedSet in the pcimGroupContainmentAuxClass object
class and the attribute pcimRulesAuxContainedSet in the
pcimRuleContainmentAuxClass object class.
To maximize flexibility, the pcimGroup class is defined as abstract.
The subclass pcimGroupAuxClass provides for auxiliary attachment to
another entry, while the structural subclass pcimGroupInstance is
available to represent a policy group as a standalone entry.
The class definitions are as follows. First, the definition of the
abstract class pcimGroup:
( 1.3.6.1.1.6.1.2 NAME 'pcimGroup'
DESC 'A container for a set of related pcimRules and/or
a set of related pcimGroups.'
SUP pcimPolicy
ABSTRACT
MAY ( pcimGroupName )
)
The one attribute of pcimGroup is pcimGroupName. This attribute is
used to define a user-friendly name of this policy group, and may be
used as a naming attribute if desired. It is defined as follows:
( 1.3.6.1.1.6.2.4 NAME 'pcimGroupName'
DESC 'The user-friendly name of this policy group.'
EQUALITY caseIgnoreMatch
ORDERING caseIgnoreOrderingMatch
SUBSTR caseIgnoreSubstringsMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
SINGLE-VALUE
)
Strassner, et al. Standards Track [Page 22]
RFC 3703 Policy Core LDAP Schema February 2004
The two subclasses of pcimGroup are defined as follows. The class
pcimGroupAuxClass is an auxiliary class that can be used to collect a
set of related pcimRule and/or pcimGroup classes. It is defined as
follows:
( 1.3.6.1.1.6.1.3 NAME 'pcimGroupAuxClass'
DESC 'An auxiliary class that collects a set of related
pcimRule and/or pcimGroup entries.'
SUP pcimGroup
AUXILIARY
)
The class pcimGroupInstance is a structural class that can be used to
collect a set of related pcimRule and/or pcimGroup classes. It is
defined as follows:
( 1.3.6.1.1.6.1.4 NAME 'pcimGroupInstance'
DESC 'A structural class that collects a set of related
pcimRule and/or pcimGroup entries.'
SUP pcimGroup
STRUCTURAL
)
A DIT content rule could be written to enable an instance of
pcimGroupInstance to have attached to it either references to one or
more policy groups (using pcimGroupContainmentAuxClass) or references
to one or more policy rules (using pcimRuleContainmentAuxClass).
This would be used to formalize the semantics of the PolicyGroup
class [1]. Since these semantics do not include specifying any
properties of the PolicyGroup class, the content rule would not need
to specify any attributes.
Similarly, three separate DIT structure rules could be written, each
of which would refer to a specific name form that identified one of
the three possible naming attributes (i.e., pcimGroupName, cn, and
orderedCIMKeys) for the pcimGroup object class. This structure rule
SHOULD include a superiorStructureRule (see Note 2 at the beginning
of section 5). The three name forms referenced by the three
structure rules would each define one of the three naming attributes.
5.3. The Three Policy Rule Classes
The information model defines a PolicyRule class to represent the "If
Condition then Action" semantics associated with processing policy
information. For maximum flexibility, the PCLS maps this class into
three LDAP classes.
Strassner, et al. Standards Track [Page 23]
RFC 3703 Policy Core LDAP Schema February 2004
To maximize flexibility, the pcimRule class is defined as abstract.
The subclass pcimRuleAuxClass provides for auxiliary attachment to
another entry, while the structural subclass pcimRuleInstance is
available to represent a policy rule as a standalone entry.
The conditions and actions associated with a policy rule are modeled,
respectively, with auxiliary subclasses of the auxiliary classes
pcimConditionAuxClass and pcimActionAuxClass. Each of these
auxiliary subclasses is attached to an instance of one of three
structural classes. A subclass of pcimConditionAuxClass is attached
to an instance of pcimRuleInstance, to an instance of
pcimRuleConditionAssociation, or to an instance of
pcimPolicyInstance. Similarly, a subclass of pcimActionAuxClass is
attached to an instance of pcimRuleInstance, to an instance of
pcimRuleActionAssociation, or to an instance of pcimPolicyInstance.
The pcimRuleValidityPeriodList attribute (defined below) realizes the
PolicyRuleValidityPeriod association defined in the PCIM. Since this
association has no additional properties besides those that tie the
association to its associated objects, this association can be
realized by simply using an attribute. Thus, the
pcimRuleValidityPeriodList attribute is simply a multi-valued
attribute that provides an unordered set of DN references to one or
more instances of the pcimTPCAuxClass, indicating when the policy
rule is scheduled to be active and when it is scheduled to be
inactive. A policy rule is scheduled to be active if it is active
according to AT LEAST ONE of the pcimTPCAuxClass instances referenced
by this attribute.
The PolicyConditionInPolicyRule and PolicyActionInPolicyRule
associations, however, do have additional attributes. The
association PolicyActionInPolicyRule defines an integer attribute to
sequence the actions, and the association PolicyConditionInPolicyRule
has both an integer attribute to group the condition terms as well as
a Boolean property to specify whether a condition is to be negated.
In the PCLS, these additional association attributes are represented
as attributes of two classes introduced specifically to model these
associations. These classes are the pcimRuleConditionAssociation
class and the pcimRuleActionAssociation class, which are defined in
Sections 5.4 and 5.5, respectively. Thus, they do not appear as
attributes of the class pcimRule. Instead, the pcimRuleConditionList
and pcimRuleActionList attributes can be used to reference these
classes.
Strassner, et al. Standards Track [Page 24]
RFC 3703 Policy Core LDAP Schema February 2004
The class definitions for the three pcimRule classes are as follows.
The abstract class pcimRule is a base class for representing the "If
Condition then Action" semantics associated with a policy rule. It
is defined as follows:
( 1.3.6.1.1.6.1.5 NAME 'pcimRule'
DESC 'The base class for representing the "If Condition
then Action" semantics associated with a policy rule.'
SUP pcimPolicy
ABSTRACT
MAY ( pcimRuleName $ pcimRuleEnabled $
pcimRuleConditionListType $ pcimRuleConditionList $
pcimRuleActionList $ pcimRuleValidityPeriodList $
pcimRuleUsage $ pcimRulePriority $
pcimRuleMandatory $ pcimRuleSequencedActions $
pcimRoles )
)
The PCIM [1] defines seven properties for the PolicyRule class. The
PCLS defines eleven attributes for the pcimRule class, which is the
LDAP equivalent of the PolicyRule class. Of these eleven attributes,
seven are mapped directly from corresponding properties in PCIM's
PolicyRule class. The remaining four attributes are a class-specific
optional naming attribute, and three attributes used to realize the
three associations that the pcimRule class participates in.
The pcimRuleName attribute is used as a user-friendly name of this
policy rule, and can also serve as the class-specific optional naming
attribute. It is defined as follows:
( 1.3.6.1.1.6.2.5 NAME 'pcimRuleName'
DESC 'The user-friendly name of this policy rule.'
EQUALITY caseIgnoreMatch
ORDERING caseIgnoreOrderingMatch
SUBSTR caseIgnoreSubstringsMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
SINGLE-VALUE
)
The pcimRuleEnabled attribute is an integer enumeration indicating
whether a policy rule is administratively enabled (value=1),
administratively disabled (value=2), or enabled for debug (value=3).
It is defined as follows:
( 1.3.6.1.1.6.2.6 NAME 'pcimRuleEnabled'
DESC 'An integer indicating whether a policy rule is
administratively enabled (value=1), disabled
Strassner, et al. Standards Track [Page 25]
RFC 3703 Policy Core LDAP Schema February 2004
(value=2), or enabled for debug (value=3).'
EQUALITY integerMatch
ORDERING integerOrderingMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
SINGLE-VALUE
)
Note: All other values for the pcimRuleEnabled attribute are
considered errors, and the administrator SHOULD treat this rule as
being disabled if an invalid value is found.
The pcimRuleConditionListType attribute is used to indicate whether
the list of policy conditions associated with this policy rule is in
disjunctive normal form (DNF, value=1) or conjunctive normal form
(CNF, value=2). It is defined as follows:
( 1.3.6.1.1.6.2.7 NAME 'pcimRuleConditionListType'
DESC 'A value of 1 means that this policy rule is in
disjunctive normal form; a value of 2 means that this
policy rule is in conjunctive normal form.'
EQUALITY integerMatch
ORDERING integerOrderingMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
SINGLE-VALUE
)
Note: any value other than 1 or 2 for the pcimRuleConditionListType
attribute is considered an error. Administrators SHOULD treat this
rule as being disabled if an invalid value is found, since it is
unclear how to structure the condition list.
The pcimRuleConditionList attribute is a multi-valued attribute that
is used to realize the policyRuleInPolicyCondition association
defined in [1]. It contains a set of DNs of
pcimRuleConditionAssociation entries representing associations
between this policy rule and its conditions. No order is implied.
It is defined as follows:
( 1.3.6.1.1.6.2.8 NAME 'pcimRuleConditionList'
DESC 'Unordered set of DNs of pcimRuleConditionAssociation
entries representing associations between this policy
rule and its conditions.'
EQUALITY distinguishedNameMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.12
)
Strassner, et al. Standards Track [Page 26]
RFC 3703 Policy Core LDAP Schema February 2004
The pcimRuleActionList attribute is a multi-valued attribute that is
used to realize the policyRuleInPolicyAction association defined in
[1]. It contains a set of DNs of pcimRuleActionAssociation entries
representing associations between this policy rule and its actions.
No order is implied. It is defined as follows:
( 1.3.6.1.1.6.2.9 NAME 'pcimRuleActionList'
DESC 'Unordered set of DNs of pcimRuleActionAssociation
entries representing associations between this policy
rule and its actions.'
EQUALITY distinguishedNameMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.12
)
The pcimRuleValidityPeriodList attribute is a multi-valued attribute
that is used to realize the pcimRuleValidityPeriod association that
is defined in [1]. It contains a set of DNs of
pcimRuleValidityAssociation entries that determine when the pcimRule
is scheduled to be active or inactive. No order is implied. It is
defined as follows:
( 1.3.6.1.1.6.2.10 NAME 'pcimRuleValidityPeriodList'
DESC 'Unordered set of DNs of pcimRuleValidityAssociation
entries that determine when the pcimRule is scheduled
to be active or inactive.'
EQUALITY distinguishedNameMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.12
)
The pcimRuleUsage attribute is a free-form string providing
guidelines on how this policy should be used. It is defined as
follows:
( 1.3.6.1.1.6.2.11 NAME 'pcimRuleUsage'
DESC 'This attribute is a free-form sting providing
guidelines on how this policy should be used.'
EQUALITY caseIgnoreMatch
ORDERING caseIgnoreOrderingMatch
SUBSTR caseIgnoreSubstringsMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
SINGLE-VALUE
)
Strassner, et al. Standards Track [Page 27]
RFC 3703 Policy Core LDAP Schema February 2004
The pcimRulePriority attribute is a non-negative integer that is used
to prioritize this pcimRule relative to other pcimRules. A larger
value indicates a higher priority. It is defined as follows:
( 1.3.6.1.1.6.2.12 NAME 'pcimRulePriority'
DESC 'A non-negative integer for prioritizing this
pcimRule relative to other pcimRules. A larger
value indicates a higher priority.'
EQUALITY integerMatch
ORDERING integerOrderingMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
SINGLE-VALUE
)
Note: if the value of the pcimRulePriority field is 0, then it SHOULD
be treated as "don't care". On the other hand, if the value is
negative, then it SHOULD be treated as an error and Administrators
SHOULD treat this rule as being disabled.
The pcimRuleMandatory attribute is a Boolean attribute that, if TRUE,
indicates that for this policy rule, the evaluation of its conditions
and execution of its actions (if the condition is satisfied) is
required. If it is FALSE, then the evaluation of its conditions and
execution of its actions (if the condition is satisfied) is not
required. This attribute is defined as follows:
( 1.3.6.1.1.6.2.13 NAME 'pcimRuleMandatory'
DESC 'If TRUE, indicates that for this policy rule, the
evaluation of its conditions and execution of its
actions (if the condition is satisfied) is required.'
EQUALITY booleanMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.7
SINGLE-VALUE
)
The pcimRuleSequencedActions attribute is an integer enumeration that
is used to indicate that the ordering of actions defined by the
pcimActionOrder attribute is either mandatory(value=1),
recommended(value=2), or dontCare(value=3). It is defined as
follows:
( 1.3.6.1.1.6.2.14 NAME 'pcimRuleSequencedActions'
DESC 'An integer enumeration indicating that the ordering of
actions defined by the pcimActionOrder attribute is
mandatory(1), recommended(2), or dontCare(3).'
EQUALITY integerMatch
ORDERING integerOrderingMatch
Strassner, et al. Standards Track [Page 28]
RFC 3703 Policy Core LDAP Schema February 2004
SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
SINGLE-VALUE
)
Note: if the value of pcimRulesSequencedActions field is not one of
these three values, then Administrators SHOULD treat this rule as
being disabled.
The pcimRoles attribute represents the policyRoles property of [1].
Each value of this attribute represents a role-combination, which is
a string of the form:
<RoleName>[&&<RoleName>]* where the individual role names appear
in alphabetical order according to the collating sequence for UCS-2.
This attribute is defined as follows:
( 1.3.6.1.1.6.2.15 NAME 'pcimRoles'
DESC 'Each value of this attribute represents a role-
combination.'
EQUALITY caseIgnoreMatch
ORDERING caseIgnoreOrderingMatch
SUBSTR caseIgnoreSubstringsMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
)
Note: if the value of the pcimRoles attribute does not conform to the
format "<RoleName>[&&<RoleName>]*" (see Section 6.3.7 of [1]), then
this attribute is malformed and its policy rule SHOULD be treated as
being disabled.
The two subclasses of the pcimRule class are defined as follows.
First, the pcimRuleAuxClass is an auxiliary class for representing
the "If Condition then Action" semantics associated with a policy
rule. Its class definition is as follows:
( 1.3.6.1.1.6.1.6 NAME 'pcimRuleAuxClass'
DESC 'An auxiliary class for representing the "If Condition
then Action" semantics associated with a policy rule.'
SUP pcimRule
AUXILIARY
)
The pcimRuleInstance is a structural class for representing the "If
Condition then Action" semantics associated with a policy rule. Its
class definition is as follows:
( 1.3.6.1.1.6.1.7 NAME 'pcimRuleInstance'
DESC 'A structural class for representing the "If Condition
then Action" semantics associated with a policy rule.'
Strassner, et al. Standards Track [Page 29]
RFC 3703 Policy Core LDAP Schema February 2004
SUP pcimRule
STRUCTURAL
)
A DIT content rule could be written to enable an instance of
pcimRuleInstance to have attached to it either references to one or
more policy conditions (using pcimConditionAuxClass) or references to
one or more policy actions (using pcimActionAuxClass). This would be
used to formalize the semantics of the PolicyRule class [1]. Since
these semantics do not include specifying any properties of the
PolicyRule class, the content rule would not need to specify any
attributes.
Similarly, three separate DIT structure rules could be written, each
of which would refer to a specific name form that identified one of
its three possible naming attributes (i.e., pcimRuleName, cn, and
orderedCIMKeys). This structure rule SHOULD include a
superiorStructureRule (see Note 2 at the beginning of section 5).
The three name forms referenced by the three structure rules would
each define one of the three naming attributes.
5.4. The Class pcimRuleConditionAssociation
This class contains attributes to represent the properties of the
PCIM's PolicyConditionInPolicyRule association. Instances of this
class are related to an instance of pcimRule via DIT containment.
The policy conditions themselves are represented by auxiliary
subclasses of the auxiliary class pcimConditionAuxClass. These
auxiliary classes are attached directly to instances of
pcimRuleConditionAssociation for rule-specific policy conditions.
For a reusable policy condition, the policyCondition auxiliary
subclass is attached to an instance of the class pcimPolicyInstance
(which is presumably associated with a pcimRepository by DIT
containment), and the policyConditionDN attribute (of this class) is
used to reference the reusable policyCondition instance.
The class definition is as follows:
( 1.3.6.1.1.6.1.8 NAME 'pcimRuleConditionAssociation'
DESC 'This class contains attributes characterizing the
relationship between a policy rule and one of its
policy conditions.'
SUP pcimPolicy
MUST ( pcimConditionGroupNumber $ pcimConditionNegated )
MAY ( pcimConditionName $ pcimConditionDN )
)
Strassner, et al. Standards Track [Page 30]
RFC 3703 Policy Core LDAP Schema February 2004
The attributes of this class are defined as follows.
The pcimConditionGroupNumber attribute is a non-negative integer. It
is used to identify the group to which the condition referenced by
this association is assigned. This attribute is defined as follows:
( 1.3.6.1.1.6.2.16
NAME 'pcimConditionGroupNumber'
DESC 'The number of the group to which a policy condition
belongs. This is used to form the DNF or CNF
expression associated with a policy rule.'
EQUALITY integerMatch
ORDERING integerOrderingMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
SINGLE-VALUE
)
Note that this number is non-negative. A negative value for this
attribute is invalid, and any policy rule that refers to an invalid
entry SHOULD be treated as being disabled.
The pcimConditionNegated attribute is a Boolean attribute that
indicates whether this policy condition is to be negated or not. If
it is TRUE (FALSE), it indicates that a policy condition IS (IS NOT)
negated in the DNF or CNF expression associated with a policy rule.
This attribute is defined as follows:
( 1.3.6.1.1.6.2.17
NAME 'pcimConditionNegated'
DESC 'If TRUE (FALSE), it indicates that a policy condition
IS (IS NOT) negated in the DNF or CNF expression
associated with a policy rule.'
EQUALITY booleanMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.7
SINGLE-VALUE
)
The pcimConditionName is a user-friendly name for identifying this
policy condition, and may be used as a naming attribute if desired.
This attribute is defined as follows:
( 1.3.6.1.1.6.2.18
NAME 'pcimConditionName'
DESC 'A user-friendly name for a policy condition.'
EQUALITY caseIgnoreMatch
ORDERING caseIgnoreOrderingMatch
SUBSTR caseIgnoreSubstringsMatch
Strassner, et al. Standards Track [Page 31]
RFC 3703 Policy Core LDAP Schema February 2004
SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
SINGLE-VALUE
)
The pcimConditionDN attribute is a DN that references an instance of
a reusable policy condition. This attribute is defined as follows:
( 1.3.6.1.1.6.2.19
NAME 'pcimConditionDN'
DESC 'A DN that references an instance of a reusable policy
condition.'
EQUALITY distinguishedNameMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.12
SINGLE-VALUE
)
A DIT content rule could be written to enable an instance of
pcimRuleConditionAssociation to have attached to it an instance of
the auxiliary class pcimConditionAuxClass, or one of its subclasses.
This would be used to formalize the semantics of the
PolicyConditionInPolicyRule association. Specifically, this would be
used to represent a rule-specific policy condition [1].
Similarly, three separate DIT structure rules could be written. Each
of these DIT structure rules would refer to a specific name form that
defined two important semantics. First, each name form would
identify one of the three possible naming attributes (i.e.,
pcimConditionName, cn, and orderedCIMKeys) for the
pcimRuleConditionAssociation object class. Second, each name form
would require that an instance of the pcimRuleConditionAssociation
class have as its superior an instance of the pcimRule class. This
structure rule SHOULD also include a superiorStructureRule (see Note
2 at the beginning of section 5).
5.5. The Class pcimRuleValidityAssociation
The policyRuleValidityPeriod aggregation is mapped to the PCLS
pcimRuleValidityAssociation class. This class represents the
scheduled activation and deactivation of a policy rule by binding the
definition of times that the policy is active to the policy rule
itself. The "scheduled" times are either identified through an
attached auxiliary class pcimTPCAuxClass, or are referenced through
its pcimTimePeriodConditionDN attribute.
This class is defined as follows:
( 1.3.6.1.1.6.1.9 NAME 'pcimRuleValidityAssociation'
DESC 'This defines the scheduled activation or deactivation
of a policy rule.'
Strassner, et al. Standards Track [Page 32]
RFC 3703 Policy Core LDAP Schema February 2004
SUP pcimPolicy
STRUCTURAL
MAY ( pcimValidityConditionName $ pcimTimePeriodConditionDN )
)
The attributes of this class are defined as follows:
The pcimValidityConditionName attribute is used to define a
user-friendly name of this condition, and may be used as a naming
attribute if desired. This attribute is defined as follows:
( 1.3.6.1.1.6.2.20
NAME 'pcimValidityConditionName'
DESC 'A user-friendly name for identifying an instance of
a pcimRuleValidityAssociation entry.'
EQUALITY caseIgnoreMatch
ORDERING caseIgnoreOrderingMatch
SUBSTR caseIgnoreSubstringsMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
SINGLE-VALUE
)
The pcimTimePeriodConditionDN attribute is a DN that references a
reusable time period condition. It is defined as follows:
( 1.3.6.1.1.6.2.21
NAME 'pcimTimePeriodConditionDN'
DESC 'A reference to a reusable policy time period
condition.'
EQUALITY distinguishedNameMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.12
SINGLE-VALUE
)
A DIT content rule could be written to enable an instance of
pcimRuleValidityAssociation to have attached to it an instance of the
auxiliary class pcimTPCAuxClass, or one of its subclasses. This
would be used to formalize the semantics of the
PolicyRuleValidityPeriod aggregation [1].
Similarly, three separate DIT structure rules could be written. Each
of these DIT structure rules would refer to a specific name form that
defined two important semantics. First, each name form would
identify one of the three possible naming attributes (i.e.,
pcimValidityConditionName, cn, and orderedCIMKeys) for the
pcimRuleValidityAssociation object class. Second, each name form
would require that an instance of the pcimRuleValidityAssociation
class have as its superior an instance of the pcimRule class. This
Strassner, et al. Standards Track [Page 33]
RFC 3703 Policy Core LDAP Schema February 2004
structure rule SHOULD also include a superiorStructureRule (see Note
2 at the beginning of section 5).
5.6. The Class pcimRuleActionAssociation
This class contains an attribute to represent the one property of the
PCIM PolicyActionInPolicyRule association, ActionOrder. This
property is used to specify an order for executing the actions
associated with a policy rule. Instances of this class are related
to an instance of pcimRule via DIT containment. The actions
themselves are represented by auxiliary subclasses of the auxiliary
class pcimActionAuxClass.
These auxiliary classes are attached directly to instances of
pcimRuleActionAssociation for rule-specific policy actions. For a
reusable policy action, the pcimAction auxiliary subclass is attached
to an instance of the class pcimPolicyInstance (which is presumably
associated with a pcimRepository by DIT containment), and the
pcimActionDN attribute (of this class) is used to reference the
reusable pcimCondition instance.
The class definition is as follows:
( 1.3.6.1.1.6.1.10 NAME 'pcimRuleActionAssociation'
DESC 'This class contains attributes characterizing the
relationship between a policy rule and one of its
policy actions.'
SUP pcimPolicy
MUST ( pcimActionOrder )
MAY ( pcimActionName $ pcimActionDN )
)
The pcimActionName attribute is used to define a user-friendly name
of this action, and may be used as a naming attribute if desired.
This attribute is defined as follows:
( 1.3.6.1.1.6.2.22
NAME 'pcimActionName'
DESC 'A user-friendly name for a policy action.'
EQUALITY caseIgnoreMatch
ORDERING caseIgnoreOrderingMatch
SUBSTR caseIgnoreSubstringsMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
SINGLE-VALUE
)
Strassner, et al. Standards Track [Page 34]
RFC 3703 Policy Core LDAP Schema February 2004
The pcimActionOrder attribute is an unsigned integer that is used to
indicate the relative position of an action in a sequence of actions
that are associated with a given policy rule. When this number is
positive, it indicates a place in the sequence of actions to be
performed, with smaller values indicating earlier positions in the
sequence. If the value is zero, then this indicates that the order
is irrelevant. Note that if two or more actions have the same
non-zero value, they may be performed in any order as long as they
are each performed in the correct place in the overall sequence of
actions. This attribute is defined as follows:
( 1.3.6.1.1.6.2.23
NAME 'pcimActionOrder'
DESC 'An integer indicating the relative order of an action
in the context of a policy rule.'
EQUALITY integerMatch
ORDERING integerOrderingMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
SINGLE-VALUE
)
Note: if the value of the pcimActionOrder field is negative, then it
SHOULD be treated as an error and any policy rule that refers to such
an entry SHOULD be treated as being disabled.
The pcimActionDN attribute is a DN that references a reusable policy
action. It is defined as follows:
( 1.3.6.1.1.6.2.24
NAME 'pcimActionDN'
DESC 'A DN that references a reusable policy action.'
EQUALITY distinguishedNameMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.12
SINGLE-VALUE
)
A DIT content rule could be written to enable an instance of
pcimRuleActionAssociation to have attached to it an instance of the
auxiliary class pcimActionAuxClass, or one of its subclasses. This
would be used to formalize the semantics of the
PolicyActionInPolicyRule association. Specifically, this would be
used to represent a rule-specific policy action [1].
Similarly, three separate DIT structure rules could be written. Each
of these DIT structure rules would refer to a specific name form that
defined two important semantics. First, each name form would
identify one of the three possible naming attributes (i.e.,
pcimActionName, cn, and orderedCIMKeys) for the
Strassner, et al. Standards Track [Page 35]
RFC 3703 Policy Core LDAP Schema February 2004
pcimRuleActionAssociation object class. Second, each name form would
require that an instance of the pcimRuleActionAssociation class have
as its superior an instance of the pcimRule class. This structure
rule should also include a superiorStructureRule (see Note 2 at the
beginning of section 5).
5.7. The Auxiliary Class pcimConditionAuxClass
The purpose of a policy condition is to determine whether or not the
set of actions (contained in the pcimRule that the condition applies
to) should be executed or not. This class defines the basic
organizational semantics of a policy condition, as specified in [1].
Subclasses of this auxiliary class can be attached to instances of
three other classes in the PCLS. When a subclass of this class is
attached to an instance of pcimRuleConditionAssociation, or to an
instance of pcimRule, it represents a rule-specific policy condition.
When a subclass of this class is attached to an instance of
pcimPolicyInstance, it represents a reusable policy condition.
Since all of the classes to which subclasses of this auxiliary class
may be attached are derived from the pcimPolicy class, the attributes
of pcimPolicy will already be defined for the entries to which these
subclasses attach. Thus, this class is derived directly from "top".
The class definition is as follows:
( 1.3.6.1.1.6.1.11 NAME 'pcimConditionAuxClass'
DESC 'A class representing a condition to be evaluated in
conjunction with a policy rule.'
SUP top
AUXILIARY
)
5.8. The Auxiliary Class pcimTPCAuxClass
The PCIM defines a time period class, PolicyTimePeriodCondition, to
provide a means of representing the time periods during which a
policy rule is valid, i.e., active. It also defines an aggregation,
PolicyRuleValidityPeriod, so that time periods can be associated with
a PolicyRule. The LDAP mapping also provides two classes, one for
the time condition itself, and one for the aggregation.
In the PCIM, the time period class is named
PolicyTimePeriodCondition. However, the resulting name of the
auxiliary class in this mapping (pcimTimePeriodConditionAuxClass)
exceeds the length of a name that some directories can store.
Therefore, the name has been shortened to pcimTPCAuxClass.
Strassner, et al. Standards Track [Page 36]
RFC 3703 Policy Core LDAP Schema February 2004
The class definition is as follows:
( 1.3.6.1.1.6.1.12 NAME 'pcimTPCAuxClass'
DESC 'This provides the capability of enabling or disabling
a policy rule according to a predetermined schedule.'
SUP pcimConditionAuxClass
AUXILIARY
MAY ( pcimTPCTime $ pcimTPCMonthOfYearMask $
pcimTPCDayOfMonthMask $ pcimTPCDayOfWeekMask $
pcimTPCTimeOfDayMask $ pcimTPCLocalOrUtcTime )
)
The attributes of the pcimTPCAuxClass are defined as follows.
The pcimTPCTime attribute represents the time period that a policy
rule is enabled for. This attribute is defined as a string in [1]
with a special format which defines a time period with a starting
date and an ending date separated by a forward slash ("/"), as
follows:
yyyymmddThhmmss/yyyymmddThhmmss
where the first date and time may be replaced with the string
"THISANDPRIOR" or the second date and time may be replaced with the
string "THISANDFUTURE". This attribute is defined as follows:
( 1.3.6.1.1.6.2.25
NAME 'pcimTPCTime'
DESC 'The start and end times on which a policy rule is
valid.'
EQUALITY caseIgnoreMatch
ORDERING caseIgnoreOrderingMatch
SUBSTR caseIgnoreSubstringsMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.44
SINGLE-VALUE
)
The value of this attribute SHOULD be checked against its defined
format ("yyyymmddThhmmss/yyyymmddThhmmss", where the first and second
date strings may be replaced with the strings "THISANDPRIOR" and
"THISANDFUTURE"). If the value of this attribute does not conform to
this syntax, then this SHOULD be considered an error and the policy
rule SHOULD be treated as being disabled.
The next four attributes (pcimTPCMonthOfYearMask,
pcimTPCDayOfMonthMask, pcimTPCDayOfWeekMask, and
pcimTPCTimeOfDayMask) are all defined as octet strings in [1].
However, the semantics of each of these attributes are contained in
Strassner, et al. Standards Track [Page 37]
RFC 3703 Policy Core LDAP Schema February 2004
bit strings of various fixed lengths. Therefore, the PCLS uses a
syntax of Bit String to represent each of them. The definition of
these four attributes are as follows.
The pcimTPCMonthOfYearMask attribute defines a 12-bit mask
identifying the months of the year in which a policy rule is valid.
The format is a bit string of length 12, representing the months of
the year from January through December. The definition of this
attribute is as follows:
( 1.3.6.1.1.6.2.26
NAME 'pcimTPCMonthOfYearMask'
DESC 'This identifies the valid months of the year for a
policy rule using a 12-bit string that represents the
months of the year from January through December.'
EQUALITY bitStringMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.6
SINGLE-VALUE
)
The value of this attribute SHOULD be checked against its defined
format. If the value of this attribute does not conform to this
syntax, then this SHOULD be considered an error and the policy rule
SHOULD be treated as being disabled.
The pcimTPCMonthOfDayMask attribute defines a mask identifying the
days of the month on which a policy rule is valid. The format is a
bit string of length 62. The first 31 positions represent the days
of the month in ascending order, from day 1 to day 31. The next 31
positions represent the days of the month in descending order, from
the last day to the day 31 days from the end. The definition of this
attribute is as follows:
( 1.3.6.1.1.6.2.27
NAME 'pcimTPCDayOfMonthMask'
DESC 'This identifies the valid days of the month for a
policy rule using a 62-bit string. The first 31
positions represent the days of the month in ascending
order, and the next 31 positions represent the days of
the month in descending order.'
EQUALITY bitStringMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.6
SINGLE-VALUE
)
Strassner, et al. Standards Track [Page 38]
RFC 3703 Policy Core LDAP Schema February 2004
The value of this attribute SHOULD be checked against its defined
format. If the value of this attribute does not conform to this
syntax, then this SHOULD be considered an error and the policy rule
SHOULD be treated as being disabled.
The pcimTPCDayOfWeekMask attribute defines a mask identifying the
days of the week on which a policy rule is valid. The format is a
bit string of length 7, representing the days of the week from Sunday
through Saturday. The definition of this attribute is as follows:
( 1.3.6.1.1.6.2.28
NAME 'pcimTPCDayOfWeekMask'
DESC 'This identifies the valid days of the week for a
policy rule using a 7-bit string. This represents
the days of the week from Sunday through Saturday.'
EQUALITY bitStringMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.6
SINGLE-VALUE
)
The value of this attribute SHOULD be checked against its defined
format. If the value of this attribute does not conform to this
syntax, then this SHOULD be considered an error and the policy rule
SHOULD be treated as being disabled.
The pcimTPCTimeOfDayMask attribute defines the range of times at
which a policy rule is valid. If the second time is earlier than the
first, then the interval spans midnight. The format of the string is
Thhmmss/Thhmmss. The definition of this attribute is as follows:
( 1.3.6.1.1.6.2.29
NAME 'pcimTPCTimeOfDayMask'
DESC 'This identifies the valid range of times for a policy
using the format Thhmmss/Thhmmss.'
EQUALITY caseIgnoreMatch
ORDERING caseIgnoreOrderingMatch
SUBSTR caseIgnoreSubstringsMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.44
SINGLE-VALUE
)
The value of this attribute SHOULD be checked against its defined
format. If the value of this attribute does not conform to this
syntax, then this SHOULD be considered an error and the policy rule
SHOULD be treated as being disabled.
Strassner, et al. Standards Track [Page 39]
RFC 3703 Policy Core LDAP Schema February 2004
Finally, the pcimTPCLocalOrUtcTime attribute is used to choose
between local or UTC time representation. This is mapped as a simple
integer syntax, with the value of 1 representing local time and the
value of 2 representing UTC time. The definition of this attribute
is as follows:
( 1.3.6.1.1.6.2.30
NAME 'pcimTPCLocalOrUtcTime'
DESC 'This defines whether the times in this instance
represent local (value=1) times or UTC (value=2)
times.'
EQUALITY integerMatch
ORDERING integerOrderingMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
SINGLE-VALUE
)
Note: if the value of the pcimTPCLocalOrUtcTime is not 1 or 2, then
this SHOULD be considered an error and the policy rule SHOULD be
disabled. If the attribute is not present at all, then all times are
interpreted as if it were present with the value 2, that is, UTC
time.
5.9. The Auxiliary Class pcimConditionVendorAuxClass
This class provides a general extension mechanism for representing
policy conditions that have not been modeled with specific
properties. Instead, its two properties are used to define the
content and format of the condition, as explained below. This class
is intended for vendor-specific extensions that are not amenable to
using pcimCondition; standardized extensions SHOULD NOT use this
class.
The class definition is as follows:
( 1.3.6.1.1.6.1.13 NAME 'pcimConditionVendorAuxClass'
DESC 'A class that defines a registered means to describe a
policy condition.'
SUP pcimConditionAuxClass
AUXILIARY
MAY ( pcimVendorConstraintData $
pcimVendorConstraintEncoding )
)
The pcimVendorConstraintData attribute is a multi-valued attribute.
It provides a general mechanism for representing policy conditions
that have not been modeled as specific attributes. This information
is encoded in a set of octet strings. The format of the octet
Strassner, et al. Standards Track [Page 40]
RFC 3703 Policy Core LDAP Schema February 2004
strings is identified by the OID stored in the
pcimVendorConstraintEncoding attribute. This attribute is defined as
follows:
( 1.3.6.1.1.6.2.31
NAME 'pcimVendorConstraintData'
DESC 'Mechanism for representing constraints that have not
been modeled as specific attributes. Their format is
identified by the OID stored in the attribute
pcimVendorConstraintEncoding.'
EQUALITY octetStringMatch
ORDERING octetStringOrderingMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.40
)
The pcimVendorConstraintEncoding attribute is used to identify the
format and semantics for the pcimVendorConstraintData attribute.
This attribute is defined as follows:
( 1.3.6.1.1.6.2.32
NAME 'pcimVendorConstraintEncoding'
DESC 'An OID identifying the format and semantics for the
pcimVendorConstraintData for this instance.'
EQUALITY objectIdentifierMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.38
SINGLE-VALUE
)
5.10. The Auxiliary Class pcimActionAuxClass
The purpose of a policy action is to execute one or more operations
that will affect network traffic and/or systems, devices, etc. in
order to achieve a desired policy state. This class is used to
represent an action to be performed as a result of a policy rule
whose condition clause was satisfied.
Subclasses of this auxiliary class can be attached to instances of
three other classes in the PCLS. When a subclass of this class is
attached to an instance of pcimRuleActionAssociation, or to an
instance of pcimRule, it represents a rule-specific policy action.
When a subclass of this class is attached to an instance of
pcimPolicyInstance, it represents a reusable policy action.
Since all of the classes to which subclasses of this auxiliary class
may be attached are derived from the pcimPolicy class, the attributes
of the pcimPolicy class will already be defined for the entries to
which these subclasses attach. Thus, this class is derived directly
from "top".
Strassner, et al. Standards Track [Page 41]
RFC 3703 Policy Core LDAP Schema February 2004
The class definition is as follows:
( 1.3.6.1.1.6.1.14 NAME 'pcimActionAuxClass'
DESC 'A class representing an action to be performed as a
result of a policy rule.'
SUP top
AUXILIARY
)
5.11. The Auxiliary Class pcimActionVendorAuxClass
The purpose of this class is to provide a general extension mechanism
for representing policy actions that have not been modeled with
specific properties. Instead, its two properties are used to define
the content and format of the action, as explained below.
As its name suggests, this class is intended for vendor-specific
extensions that are not amenable to using the standard pcimAction
class. Standardized extensions SHOULD NOT use this class.
The class definition is as follows:
( 1.3.6.1.1.6.1.15 NAME 'pcimActionVendorAuxClass'
DESC 'A class that defines a registered means to describe a
policy action.'
SUP pcimActionAuxClass
AUXILIARY
MAY ( pcimVendorActionData $ pcimVendorActionEncoding )
)
The pcimVendorActionData attribute is a multi-valued attribute. It
provides a general mechanism for representing policy actions that
have not been modeled as specific attributes. This information is
encoded in a set of octet strings. The format of the octet strings
is identified by the OID stored in the pcimVendorActionEncoding
attribute. This attribute is defined as follows:
( 1.3.6.1.1.6.2.33
NAME 'pcimVendorActionData'
DESC ' Mechanism for representing policy actions that have
not been modeled as specific attributes. Their
format is identified by the OID stored in the
attribute pcimVendorActionEncoding.'
EQUALITY octetStringMatch
ORDERING octetStringOrderingMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.40
)
Strassner, et al. Standards Track [Page 42]
RFC 3703 Policy Core LDAP Schema February 2004
The pcimVendorActionEncoding attribute is used to identify the format
and semantics for the pcimVendorActionData attribute. This attribute
is defined as follows:
( 1.3.6.1.1.6.2.34
NAME 'pcimVendorActionEncoding'
DESC 'An OID identifying the format and semantics for the
pcimVendorActionData attribute of this instance.'
EQUALITY objectIdentifierMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.38
SINGLE-VALUE
)
5.12. The Class pcimPolicyInstance
This class is not defined in the PCIM. Its role is to serve as a
structural class to which auxiliary classes representing policy
information are attached when the information is reusable. For
auxiliary classes representing policy conditions and policy actions,
there are alternative structural classes that may be used. See
Section 4.4 for a complete discussion of reusable policy conditions
and actions, and of the role that this class plays in how they are
represented.
The class definition is as follows:
( 1.3.6.1.1.6.1.16 NAME 'pcimPolicyInstance'
DESC 'A structural class to which aux classes containing
reusable policy information can be attached.'
SUP pcimPolicy
MAY ( pcimPolicyInstanceName )
)
The pcimPolicyInstanceName attribute is used to define a
user-friendly name of this class, and may be used as a naming
attribute if desired. It is defined as follows:
( 1.3.6.1.1.6.2.35 NAME 'pcimPolicyInstanceName'
DESC 'The user-friendly name of this policy instance.'
EQUALITY caseIgnoreMatch
ORDERING caseIgnoreOrderingMatch
SUBSTR caseIgnoreSubstringsMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
SINGLE-VALUE
)
Strassner, et al. Standards Track [Page 43]
RFC 3703 Policy Core LDAP Schema February 2004
A DIT content rule could be written to enable an instance of
pcimPolicyInstance to have attached to it either instances of one or
more of the auxiliary object classes pcimConditionAuxClass and
pcimActionAuxClass. Since these semantics do not include specifying
any properties, the content rule would not need to specify any
attributes. Note that other content rules could be defined to enable
other policy-related auxiliary classes to be attached to
pcimPolicyInstance.
Similarly, three separate DIT structure rules could be written. Each
of these DIT structure rules would refer to a specific name form that
defined two important semantics. First, each name form would
identify one of the three possible naming attributes (i.e.,
pcimPolicyInstanceName, cn, and orderedCIMKeys) for this object
class. Second, each name form would require that an instance of the
pcimPolicyInstance class have as its superior an instance of the
pcimRepository class. This structure rule SHOULD also include a
superiorStructureRule (see Note 2 at the beginning of section 5).
5.13. The Auxiliary Class pcimElementAuxClass
This class introduces no additional attributes, beyond those defined
in the class pcimPolicy from which it is derived. Its role is to
"tag" an instance of a class defined outside the realm of policy
information as represented by PCIM as being nevertheless relevant to
a policy specification. This tagging can potentially take place at
two levels:
- Every instance to which pcimElementAuxClass is attached becomes
an instance of the class pcimPolicy, since pcimElementAuxClass is
a subclass of pcimPolicy. Searching for object
class="pcimPolicy" will return the instance. (As noted earlier,
this approach does NOT work for some directory implementations.
To accommodate these implementations, policy-related entries
SHOULD be tagged with the pcimKeyword "POLICY".)
- With the pcimKeywords attribute that it inherits from pcimPolicy,
an instance to which pcimElementAuxClass is attached can be
tagged as being relevant to a particular type or category of
policy information, using standard keywords,
administrator-defined keywords, or both.
The class definition is as follows:
( 1.3.6.1.1.6.1.17 NAME 'pcimElementAuxClass'
DESC 'An auxiliary class used to tag instances of classes
defined outside the realm of policy as relevant to a
particular policy specification.'
Strassner, et al. Standards Track [Page 44]
RFC 3703 Policy Core LDAP Schema February 2004
SUP pcimPolicy
AUXILIARY
)
5.14. The Three Policy Repository Classes
These classes provide a container for reusable policy information,
such as reusable policy conditions and/or reusable policy actions.
This document is concerned with mapping just the properties that
appear in these classes. Conceptually, this may be thought of as a
special location in the DIT where policy information may reside.
Since pcimRepository is derived from the class dlm1AdminDomain
defined in reference [6], this specification has a normative
dependency on that element of reference [6] (as well as on its entire
derivation hierarchy, which also appears in reference [6]). To
maximize flexibility, the pcimRepository class is defined as
abstract. A subclass pcimRepositoryAuxClass provides for auxiliary
attachment to another entry, while a structural subclass
pcimRepositoryInstance is available to represent a policy repository
as a standalone entry.
The definition for the pcimRepository class is as follows:
( 1.3.6.1.1.6.1.18 NAME 'pcimRepository'
DESC 'A container for reusable policy information.'
SUP dlm1AdminDomain
ABSTRACT
MAY ( pcimRepositoryName )
)
The pcimRepositoryName attribute is used to define a user-friendly
name of this class, and may be used as a naming attribute if desired.
It is defined as follows:
( 1.3.6.1.1.6.2.36 NAME 'pcimRepositoryName'
DESC 'The user-friendly name of this policy repository.'
EQUALITY caseIgnoreMatch
ORDERING caseIgnoreOrderingMatch
SUBSTR caseIgnoreSubstringsMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
SINGLE-VALUE
)
Strassner, et al. Standards Track [Page 45]
RFC 3703 Policy Core LDAP Schema February 2004
The two subclasses of pcimRepository are defined as follows. First,
the pcimRepositoryAuxClass is an auxiliary class that can be used to
aggregate reusable policy information. It is defined as follows:
( 1.3.6.1.1.6.1.19 NAME 'pcimRepositoryAuxClass'
DESC 'An auxiliary class that can be used to aggregate
reusable policy information.'
SUP pcimRepository
AUXILIARY
)
In cases where structural classes are needed instead of an auxiliary
class, the pcimRepositoryInstance class is a structural class that
can be used to aggregate reusable policy information. It is defined
as follows:
( 1.3.6.1.1.6.1.20 NAME 'pcimRepositoryInstance'
DESC 'A structural class that can be used to aggregate
reusable policy information.'
SUP pcimRepository
STRUCTURAL
)
Three separate DIT structure rules could be written for this class.
Each of these DIT structure rules would refer to a specific name form
that enabled an instance of the pcimRepository class to be named
under any superior using one of the three possible naming attributes
(i.e., pcimRepositoryName, cn, and orderedCIMKeys). This structure
rule SHOULD also include a superiorStructureRule (see Note 2 at the
beginning of section 5).
5.15. The Auxiliary Class pcimSubtreesPtrAuxClass
This auxiliary class provides a single, multi-valued attribute that
references a set of objects that are at the root of DIT subtrees
containing policy-related information. By attaching this attribute
to instances of various other classes, a policy administrator has a
flexible way of providing an entry point into the directory that
allows a client to locate and retrieve the policy information
relevant to it.
It is intended that these entries are placed in the DIT such that
well-known DNs can be used to reference a well-known structural entry
that has the pcimSubtreesPtrAuxClass attached to it. In effect, this
defines a set of entry points. Each of these entry points can
contain and/or reference all related policy entries for
Strassner, et al. Standards Track [Page 46]
RFC 3703 Policy Core LDAP Schema February 2004
any well-known policy domains. The pcimSubtreesPtrAuxClass functions
as a tag to identify portions of the DIT that contain policy
information.
This object does not provide the semantic linkages between individual
policy objects, such as those between a policy group and the policy
rules that belong to it. Its only role is to enable efficient bulk
retrieval of policy-related objects, as described in Section 4.5.
Once the objects have been retrieved, a directory client can
determine the semantic linkages by following references contained in
multi-valued attributes, such as pcimRulesAuxContainedSet.
Since policy-related objects will often be included in the DIT
subtree beneath an object to which this auxiliary class is attached,
a client SHOULD request the policy-related objects from the subtree
under the object with these references at the same time that it
requests the references themselves.
Since clients are expected to behave in this way, the policy
administrator SHOULD make sure that this subtree does not contain so
many objects unrelated to policy that an initial search done in this
way results in a performance problem. The pcimSubtreesPtrAuxClass
SHOULD NOT be attached to the partition root for a large directory
partition containing a relatively few number of policy-related
objects along with a large number of objects unrelated to policy
(again, "policy" here refers to the PCIM, not the X.501, definition
and use of "policy"). A better approach would be to introduce a
container object immediately below the partition root, attach
pcimSubtreesPtrAuxClass to this container object, and then place all
of the policy-related objects in that subtree.
The class definition is as follows:
( 1.3.6.1.1.6.1.21 NAME 'pcimSubtreesPtrAuxClass'
DESC 'An auxiliary class providing DN references to roots of
DIT subtrees containing policy-related objects.'
SUP top
AUXILIARY
MAY ( pcimSubtreesAuxContainedSet )
)
Strassner, et al. Standards Track [Page 47]
RFC 3703 Policy Core LDAP Schema February 2004
The attribute pcimSubtreesAuxContainedSet provides an unordered set
of DN references to instances of one or more objects under which
policy-related information is present. The objects referenced may or
may not themselves contain policy-related information. The attribute
definition is as follows:
( 1.3.6.1.1.6.2.37
NAME 'pcimSubtreesAuxContainedSet'
DESC 'DNs of objects that serve as roots for DIT subtrees
containing policy-related objects.'
EQUALITY distinguishedNameMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.12
)
Note that the cn attribute does NOT need to be defined for this
class. This is because an auxiliary class is used as a means to
collect common attributes and treat them as properties of an object.
A good analogy is a #include file, except that since an auxiliary
class is a class, all the benefits of a class (e.g., inheritance) can
be applied to an auxiliary class.
5.16. The Auxiliary Class pcimGroupContainmentAuxClass
This auxiliary class provides a single, multi-valued attribute that
references a set of pcimGroups. By attaching this attribute to
instances of various other classes, a policy administrator has a
flexible way of providing an entry point into the directory that
allows a client to locate and retrieve the pcimGroups relevant to it.
As is the case with pcimRules, a policy administrator might have
several different references to a pcimGroup in the overall directory
structure. The pcimGroupContainmentAuxClass is the mechanism that
makes it possible for the policy administrator to define all these
different references.
The class definition is as follows:
( 1.3.6.1.1.6.1.22 NAME 'pcimGroupContainmentAuxClass'
DESC 'An auxiliary class used to bind pcimGroups to an
appropriate container object.'
SUP top
AUXILIARY
MAY ( pcimGroupsAuxContainedSet )
)
Strassner, et al. Standards Track [Page 48]
RFC 3703 Policy Core LDAP Schema February 2004
The attribute pcimGroupsAuxContainedSet provides an unordered set of
references to instances of one or more pcimGroups associated with the
instance of a structural class to which this attribute has been
appended.
The attribute definition is as follows:
( 1.3.6.1.1.6.2.38
NAME 'pcimGroupsAuxContainedSet'
DESC 'DNs of pcimGroups associated in some way with the
instance to which this attribute has been appended.'
EQUALITY distinguishedNameMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.12
)
Note that the cn attribute does NOT have to be defined for this class
for the same reasons as those given for the pcimSubtreesPtrAuxClass
in section 5.15.
5.17. The Auxiliary Class pcimRuleContainmentAuxClass
This auxiliary class provides a single, multi-valued attribute that
references a set of pcimRules. By attaching this attribute to
instances of various other classes, a policy administrator has a
flexible way of providing an entry point into the directory that
allows a client to locate and retrieve the pcimRules relevant to it.
A policy administrator might have several different references to a
pcimRule in the overall directory structure. For example, there
might be references to all pcimRules for traffic originating in a
particular subnet from a directory entry that represents that subnet.
At the same time, there might be references to all pcimRules related
to a particular DiffServ setting from an instance of a pcimGroup
explicitly introduced as a container for DiffServ-related pcimRules.
The pcimRuleContainmentAuxClass is the mechanism that makes it
possible for the policy administrator to define all these separate
references.
The class definition is as follows:
( 1.3.6.1.1.6.1.23 NAME 'pcimRuleContainmentAuxClass'
DESC 'An auxiliary class used to bind pcimRules to an
appropriate container object.'
SUP top
AUXILIARY
MAY ( pcimRulesAuxContainedSet )
)
Strassner, et al. Standards Track [Page 49]
RFC 3703 Policy Core LDAP Schema February 2004
The attribute pcimRulesAuxContainedSet provides an unordered set of
references to one or more instances of pcimRules associated with the
instance of a structural class to which this attribute has been
appended. The attribute definition is as follows:
( 1.3.6.1.1.6.2.39
NAME 'pcimRulesAuxContainedSet'
DESC 'DNs of pcimRules associated in some way with the
instance to which this attribute has been appended.'
EQUALITY distinguishedNameMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.12
)
The cn attribute does NOT have to be defined for this class for the
same reasons as those given for the pcimSubtreesPtrAuxClass in
section 5.15.
6. Extending the Classes Defined in This Document
The following subsections provide general guidance on how to create a
domain-specific schema derived from this document, discuss how the
vendor classes in the PCLS should be used, and explain how
policyTimePeriodConditions are related to other policy conditions.
6.1. Subclassing pcimConditionAuxClass and pcimActionAuxClass
In Section 4.4, there is a discussion of how, by representing policy
conditions and policy actions as auxiliary classes in a schema, the
flexibility is retained to instantiate a particular condition or
action as either rule-specific or reusable. This flexibility is lost
if a condition or action class is defined as structural rather than
auxiliary. For standardized schemata, this document specifies that
domain-specific information MUST be expressed in auxiliary subclasses
of pcimConditionAuxClass and pcimActionAuxClass. It is RECOMMENDED
that non-standardized schemata follow this practice as well.
6.2. Using the Vendor Policy Attributes
As discussed Section 5.9, the attributes pcimVendorConstraintData and
pcimVendorConstraintEncoding are included in the
pcimConditionVendorAuxClass to provide a mechanism for representing
vendor-specific policy conditions that are not amenable to being
represented with the pcimCondition class (or its subclasses). The
attributes pcimVendorActionData and pcimVendorActionEncoding in the
pcimActionVendorAuxClass class play the same role with respect to
actions. This enables interoperability between different vendors who
could not otherwise interoperate.
Strassner, et al. Standards Track [Page 50]
RFC 3703 Policy Core LDAP Schema February 2004
For example, imagine a network composed of access devices from vendor
A, edge and core devices from vendor B, and a policy server from
vendor C. It is desirable for this policy server to be able to
configure and manage all of the devices from vendors A and B.
Unfortunately, these devices will in general have little in common
(e.g., different mechanisms, different ways for controlling those
mechanisms, different operating systems, different commands, and so
forth). The extension conditions provide a way for vendor-specific
commands to be encoded as octet strings, so that a single policy
server can commonly manage devices from different vendors.
6.3. Using Time Validity Periods
Time validity periods are defined as an auxiliary subclass of
pcimConditionAuxClass, called pcimTPCAuxClass. This is to allow
their inclusion in the AND/OR condition definitions for a pcimRule.
Care should be taken not to subclass pcimTPCAuxClass to add
domain-specific condition properties.
For example, it would be incorrect to add IPsec- or QoS-specific
condition properties to the pcimTPCAuxClass class, just because IPsec
or QoS includes time in its condition definition. The correct
subclassing would be to create IPsec or QoS-specific subclasses of
pcimConditionAuxClass and then combine instances of these
domain-specific condition classes with the appropriate validity
period criteria. This is accomplished using the AND/OR association
capabilities for policy conditions in pcimRules.
7. Security Considerations
The PCLS, presented in this document, provides a mapping of the
object-oriented model for describing policy information (PCIM) into a
data model that forms the basic framework for describing the
structure of policy data, in the case where the policy repository
takes the form of an LDAP-accessible directory.
PCLS is not intended to represent any particular system design or
implementation. PCLS is not directly useable in a real world system,
without the discipline-specific mappings that are works in progress
in the Policy Framework Working Group of the IETF.
These other derivative documents, which use PCIM and its
discipline-specific extensions as a base, will need to convey more
specific security considerations (refer to RFC 3060 for more
information.)
Strassner, et al. Standards Track [Page 51]
RFC 3703 Policy Core LDAP Schema February 2004
The reason that PCLS, as defined here, is not representative of any
real-world system, is that its object classes were designed to be
independent of any specific discipline, or policy domain. For
example, DiffServ and IPsec represent two different policy domains.
Each document that extends PCIM to one of these domains will derive
subclasses from the classes and relationships defined in PCIM, in
order to represent extensions of a generic model to cover specific
technical domains.
PCIM-derived documents will thus subclass the PCIM classes into
classes specific to each technical policy domain (QOS, IPsec, etc.),
which will, in turn, be mapped, to directory-specific schemata
consistent with the PCLS documented here.
Even though discipline-specific security requirements are not
appropriate for PCLS, specific security requirements MUST be defined
for each operational real-world application of PCIM. Just as there
will be a wide range of operational, real-world systems using PCIM,
there will also be a wide range of security requirements for these
systems. Some operational, real-world systems that are deployed
using PCLS may have extensive security requirements that impact
nearly all object classes utilized by such a system, while other
systems' security requirements might have very little impact.
The derivative documents, discussed above, will create the context
for applying operational, real-world, system-level security
requirements against the various models that derive from PCIM,
consistent with PCLS.
In some real-world scenarios, the values associated with certain
properties, within certain instantiated object classes, may represent
information associated with scarce, and/or costly (and therefore
valuable) resources. It may be the case that these values must not
be disclosed to, or manipulated by, unauthorized parties.
Since this document forms the basis for the representation of a
policy data model in a specific format (an LDAP-accessible
directory), it is herein appropriate to reference the data
model-specific tools and mechanisms that are available for achieving
the authentication and authorization implicit in a requirement that
restricts read and/or read- write access to these values stored in a
directory.
Strassner, et al. Standards Track [Page 52]
RFC 3703 Policy Core LDAP Schema February 2004
General LDAP security considerations apply, as documented in RFC 3377
[2]. LDAP-specific authentication and authorization tools and
mechanisms are found in the following standards track documents,
which are appropriate for application to the management of security
applied to policy data models stored in an LDAP-accessible directory:
- RFC 2829 (Authentication Methods for LDAP)
- RFC 2830 (Lightweight Directory Access Protocol (v3): Extension
for Transport Layer Security)
Any identified security requirements that are not dealt with in the
appropriate discipline-specific information model documents, or in
this document, MUST be dealt with in the derivative data model
documents which are specific to each discipline.
8. IANA Considerations
Refer to RFC 3383, "Internet Assigned Numbers Authority (IANA)
Considerations for the Lightweight Directory Access Protocol (LDAP)"
[16].
8.1. Object Identifiers
The IANA has registered an LDAP Object Identifier for use in this
technical specification according to the following template:
Subject: Request for LDAP OID Registration
Person & email address to contact for further information:
Bob Moore (remoore@us.ibm.com)
Specification: RFC 3703
Author/Change Controller: IESG
Comments:
The assigned OID will be used as a base for identifying
a number of schema elements defined in this document.
IANA has assigned an OID of 1.3.6.1.1.6 with the name of pcimSchema
to this registration as recorded in the following registry:
http://www.iana.org/assignments/smi-numbers
8.2. Object Identifier Descriptors
The IANA has registered the LDAP Descriptors used in this technical
specification as detailed in the following template:
Subject: Request for LDAP Descriptor Registration Update
Descriptor (short name): see comment
Object Identifier: see comment
Strassner, et al. Standards Track [Page 53]
RFC 3703 Policy Core LDAP Schema February 2004
Person & email address to contact for further information:
Bob Moore (remoore@us.ibm.com)
Usage: see comment
Specification: RFC 3703
Author/Change Controller: IESG
Comments:
The following descriptors have been added:
NAME Type OID
-------------- ---- ------------
pcimPolicy O 1.3.6.1.1.6.1.1
pcimGroup O 1.3.6.1.1.6.1.2
pcimGroupAuxClass O 1.3.6.1.1.6.1.3
pcimGroupInstance O 1.3.6.1.1.6.1.4
pcimRule O 1.3.6.1.1.6.1.5
pcimRuleAuxClass O 1.3.6.1.1.6.1.6
pcimRuleInstance O 1.3.6.1.1.6.1.7
pcimRuleConditionAssociation O 1.3.6.1.1.6.1.8
pcimRuleValidityAssociation O 1.3.6.1.1.6.1.9
pcimRuleActionAssociation O 1.3.6.1.1.6.1.10
pcimConditionAuxClass O 1.3.6.1.1.6.1.11
pcimTPCAuxClass O 1.3.6.1.1.6.1.12
pcimConditionVendorAuxClass O 1.3.6.1.1.6.1.13
pcimActionAuxClass O 1.3.6.1.1.6.1.14
pcimActionVendorAuxClass O 1.3.6.1.1.6.1.15
pcimPolicyInstance O 1.3.6.1.1.6.1.16
pcimElementAuxClass O 1.3.6.1.1.6.1.17
pcimRepository O 1.3.6.1.1.6.1.18
pcimRepositoryAuxClass O 1.3.6.1.1.6.1.19
pcimRepositoryInstance O 1.3.6.1.1.6.1.20
pcimSubtreesPtrAuxClass O 1.3.6.1.1.6.1.21
pcimGroupContainmentAuxClass O 1.3.6.1.1.6.1.22
pcimRuleContainmentAuxClass O 1.3.6.1.1.6.1.23
pcimKeywords A 1.3.6.1.1.6.2.3
pcimGroupName A 1.3.6.1.1.6.2.4
pcimRuleName A 1.3.6.1.1.6.2.5
pcimRuleEnabled A 1.3.6.1.1.6.2.6
pcimRuleConditionListType A 1.3.6.1.1.6.2.7
pcimRuleConditionList A 1.3.6.1.1.6.2.8
pcimRuleActionList A 1.3.6.1.1.6.2.9
pcimRuleValidityPeriodList A 1.3.6.1.1.6.2.10
pcimRuleUsage A 1.3.6.1.1.6.2.11
pcimRulePriority A 1.3.6.1.1.6.2.12
pcimRuleMandatory A 1.3.6.1.1.6.2.13
pcimRuleSequencedActions A 1.3.6.1.1.6.2.14
pcimRoles A 1.3.6.1.1.6.2.15
pcimConditionGroupNumber A 1.3.6.1.1.6.2.16
Strassner, et al. Standards Track [Page 54]
RFC 3703 Policy Core LDAP Schema February 2004
NAME Type OID
-------------- ---- ------------
pcimConditionNegated A 1.3.6.1.1.6.2.17
pcimConditionName A 1.3.6.1.1.6.2.18
pcimConditionDN A 1.3.6.1.1.6.2.19
pcimValidityConditionName A 1.3.6.1.1.6.2.20
pcimTimePeriodConditionDN A 1.3.6.1.1.6.2.21
pcimActionName A 1.3.6.1.1.6.2.22
pcimActionOrder A 1.3.6.1.1.6.2.23
pcimActionDN A 1.3.6.1.1.6.2.24
pcimTPCTime A 1.3.6.1.1.6.2.25
pcimTPCMonthOfYearMask A 1.3.6.1.1.6.2.26
pcimTPCDayOfMonthMask A 1.3.6.1.1.6.2.27
pcimTPCDayOfWeekMask A 1.3.6.1.1.6.2.28
pcimTPCTimeOfDayMask A 1.3.6.1.1.6.2.29
pcimTPCLocalOrUtcTime A 1.3.6.1.1.6.2.30
pcimVendorConstraintData A 1.3.6.1.1.6.2.31
pcimVendorConstraintEncoding A 1.3.6.1.1.6.2.32
pcimVendorActionData A 1.3.6.1.1.6.2.33
pcimVendorActionEncoding A 1.3.6.1.1.6.2.34
pcimPolicyInstanceName A 1.3.6.1.1.6.2.35
pcimRepositoryName A 1.3.6.1.1.6.2.36
pcimSubtreesAuxContainedSet A 1.3.6.1.1.6.2.37
pcimGroupsAuxContainedSet A 1.3.6.1.1.6.2.38
pcimRulesAuxContainedSet A 1.3.6.1.1.6.2.39
where Type A is Attribute, Type O is ObjectClass
These assignments are recorded in the following registry:
http://www.iana.org/assignments/ldap-parameters
Strassner, et al. Standards Track [Page 55]
RFC 3703 Policy Core LDAP Schema February 2004
9. Acknowledgments
We would like to thank Kurt Zeilenga, Roland Hedburg, and Steven Legg
for doing a review of this document and making many helpful
suggestions and corrections.
Several of the policy classes in this model first appeared in early
IETF drafts on IPsec policy and QoS policy. The authors of these
drafts were Partha Bhattacharya, Rob Adams, William Dixon, Roy
Pereira, Raju Rajan, Jean-Christophe Martin, Sanjay Kamat, Michael
See, Rajiv Chaudhury, Dinesh Verma, George Powers, and Raj Yavatkar.
This document is closely aligned with the work being done in the
Distributed Management Task Force (DMTF) Policy and Networks working
groups. We would especially like to thank Lee Rafalow, Glenn Waters,
David Black, Michael Richardson, Mark Stevens, David Jones, Hugh
Mahon, Yoram Snir, and Yoram Ramberg for their helpful comments.
Strassner, et al. Standards Track [Page 56]
RFC 3703 Policy Core LDAP Schema February 2004
10. Appendix: Constructing the Value of orderedCIMKeys
This appendix is non-normative, and is included in this document as a
guide to implementers that wish to exchange information between CIM
schemata and LDAP schemata.
Within a CIM name space, the naming is basically flat; all instances
are identified by the values of their key properties, and each
combination of key values must be unique. A limited form of
hierarchical naming is available in CIM, however, by using weak
associations: since a weak association involves propagation of key
properties and their values from the superior object to the
subordinate one, the subordinate object can be thought of as being
named "under" the superior object. Once they have been propagated,
however, propagated key properties and their values function in
exactly the same way that native key properties and their values do
in identifying a CIM instance.
The CIM mapping document [6] introduces a special attribute,
orderedCIMKeys, to help map from the CIM_ManagedElement class to the
LDAP class dlm1ManagedElement. This attribute SHOULD only be used in
an environment where it is necessary to map between an
LDAP-accessible directory and a CIM repository. For an LDAP
environment, other LDAP naming attributes are defined (i.e., cn and a
class-specific naming attribute) that SHOULD be used instead.
The role of orderedCIMKeys is to represent the information necessary
to correlate an entry in an LDAP-accessible directory with an
instance in a CIM name space. Depending on how naming of CIM-related
entries is handled in an LDAP directory, the value of orderedCIMKeys
represents one of two things:
- If the DIT hierarchy does not mirror the "weakness hierarchy" of
the CIM name space, then orderedCIMKeys represents all the
keys of the CIM instance, both native and propagated.
- If the DIT hierarchy does mirror the "weakness hierarchy" of the
CIM name space, then orderedCIMKeys may represent either all the
keys of the instance, or only the native keys.
Regardless of which of these alternatives is taken, the syntax of
orderedCIMKeys is the same - a DirectoryString of the form
<className>.<key>=<value>[,<key>=<value>]*
where the <key>=<value> elements are ordered by the names of the key
properties, according to the collating sequence for US ASCII. The
only spaces allowed in the DirectoryString are those that fall within
a <value> element. As with alphabetizing the key properties, the
Strassner, et al. Standards Track [Page 57]
RFC 3703 Policy Core LDAP Schema February 2004
goal of suppressing the spaces is once again to make the results of
string operations predictable.
The values of the <value> elements are derived from the various CIM
syntaxes according to a grammar specified in [5].
11. References
11.1. Normative References
[1] Moore, B., Ellesson,E., Strassner, J. and A. Westerinen "Policy
Core Information Model -- Version 1 Specification", RFC 3060,
February 2001.
[2] Hodges, J. and R. Morgan, "Lightweight Directory Access
Protocol (v3): Technical Specification", RFC 3377, September
2002.
[3] Wahl, M., Coulbeck, A., Howes,T. and S. Kille, "Lightweight
Directory Access Protocol (v3): Attribute Syntax Definitions",
RFC 2252, December 1997.
[4] The Directory: Models. ITU-T Recommendation X.501, 2001.
[5] Distributed Management Task Force, Inc., "Common Information
Model (CIM) Specification", Version 2.2, June 14, 1999. This
document is available on the following DMTF web page:
http://www.dmtf.org/standards/documents/CIM/DSP0004.pdf
[6] Distributed Management Task Force, Inc., "DMTF LDAP Schema for
the CIM v2.5 Core Information Model", April 15, 2002. This
document is available on the following DMTF web page:
http://www.dmtf.org/standards/documents/DEN/DSP0123.pdf
[7] Wahl, M., "A Summary of the X.500(96) User Schema for use with
LDAPv3", RFC 2256, December 1997.
[8] The Directory: Selected Attribute Types. ITU-T Recommendation
X.520, 2001.
[9] Zeilenga, K., Ed., "Lightweight Directory Access Protocol
(LDAP): Additional Matching Rules", RFC 3698, February 2004.
[10] Bradner, S., "Key words for use in RFCs to Indicate Requirement
Levels", BCP 14, RFC 2119, March 1997.
Strassner, et al. Standards Track [Page 58]
RFC 3703 Policy Core LDAP Schema February 2004
11.2. Informative References
[11] Hovey, R. and S. Bradner, "The Organizations Involved in the
IETF Standards Process", BCP 11, RFC 2028, October 1996.
[12] Strassner, J., policy architecture BOF presentation, 42nd IETF
Meeting, Chicago, Illinois, October 1998. Minutes of this BOF
are available at the following location:
http://www.ietf.org/proceedings/98aug/index.html.
[13] Yavatkar, R., Guerin, R. and D. Pendarakis, "A Framework for
Policy-based Admission Control", RFC 2753, January 2000.
[14] Wahl, M., Alvestrand, H., Hodges, J. and R. Morgan,
"Authentication Methods for LDAP", RFC 2829, May 2000
[15] Hodges, J., Morgan, R. and M. Wahl, "Lightweight Directory
Access Protocol (v3): Extension for Transport Layer Security",
RFC 2830, May 2000.
[16] Zeilenga, K., "Internet Assigned Numbers Authority (IANA)
Considerations for the Lightweight Directory Access Protocol
(LDAP)", BCP 64, RFC 3383, September 2002.
Strassner, et al. Standards Track [Page 59]
RFC 3703 Policy Core LDAP Schema February 2004
12. Authors' Addresses
John Strassner
Intelliden Corporation
90 South Cascade Avenue
Colorado Springs, CO 80903
Phone: +1.719.785.0648
Fax: +1.719.785.0644
EMail: john.strassner@intelliden.com
Bob Moore
IBM Corporation
P. O. Box 12195, BRQA/B501/G206
3039 Cornwallis Rd.
Research Triangle Park, NC 27709-2195
Phone: +1 919-254-4436
Fax: +1 919-254-6243
EMail: remoore@us.ibm.com
Ryan Moats
Lemur Networks, Inc.
15621 Drexel Circle
Omaha, NE 68135
Phone: +1-402-894-9456
EMail: rmoats@lemurnetworks.net
Ed Ellesson
3026 Carriage Trail
Hillsborough, NC 27278
Phone: +1 919-644-3977
EMail: ellesson@mindspring.com
Strassner, et al. Standards Track [Page 60]
RFC 3703 Policy Core LDAP Schema February 2004
13. Full Copyright Statement
Copyright (C) The Internet Society (2004). This document is subject
to the rights, licenses and restrictions contained in BCP 78 and
except as set forth therein, the authors retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE
REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE
INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed
to pertain to the implementation or use of the technology
described in this document or the extent to which any license
under such rights might or might not be available; nor does it
represent that it has made any independent effort to identify any
such rights. Information on the procedures with respect to
rights in RFC documents can be found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use
of such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository
at http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention
any copyrights, patents or patent applications, or other
proprietary rights that may cover technology that may be required
to implement this standard. Please address the information to the
IETF at ietf-ipr@ietf.org.
Acknowledgement
Funding for the RFC Editor function is currently provided by the
Internet Society.
Strassner, et al. Standards Track [Page 61]