# Initialisation for new style completion. This mainly contains some helper
# functions and setup. Everything else is split into different files that
# will automatically be made autoloaded (see the end of this file).  The
# names of the files that will be considered for autoloading are those that
# begin with an underscores (like `_condition).
#
# The first line of each of these files is read and must indicate what
# should be done with its contents:
#
#   `#compdef <names ...>'
#     If the first line looks like this, the file is autoloaded as a
#     function and that function will be called to generate the matches
#     when completing for one of the commands whose <names> are given.
#     The names may also be interspersed with `-T <assoc>' options
#     specifying for which set of functions this should be added.
#
#   `#compdef -[pP] <patterns ...>'
#     This defines a function that should be called to generate matches
#     for commands whose name matches <pattern>. Note that only one pattern
#     may be given.
#
#   `#compdef -k <style> [ <key-sequence> ... ]'
#     This is used to bind special completions to all the given
#     <key-sequence>(s). The <style> is the name of one of the built-in
#     completion widgets (complete-word, delete-char-or-list,
#     expand-or-complete, expand-or-complete-prefix, list-choices,
#     menu-complete, menu-expand-or-complete, or reverse-menu-complete).
#     This creates a widget behaving like <style> so that the
#     completions are chosen as given in the rest of the file,
#     rather than by the context.  The widget has the same name as
#     the autoload file and can be bound using bindkey in the normal way.
#
#   `#compdef -K <widget-name> <style> <key-sequence> [ ... ]'
#     This is similar to -k, except it takes any number of sets of
#     three arguments.  In each set, the widget <widget-name> will
#     be defined, which will behave as <style>, as with -k, and will
#     be bound to <key-sequence>, exactly one of which must be defined.
#     <widget-name> must be different for each:  this must begin with an
#     underscore, else one will be added, and should not clash with other
#     completion widgets (names based on the name of the function are the
#     clearest), but is otherwise arbitrary.  It can be tested in the
#     function by the parameter $WIDGET.
#
#   `#autoload [ <options> ]'
#     This is for helper functions that are not used to
#     generate matches, but should automatically be loaded
#     when they are called. The <options> will be given to the
#     autoload builtin when making the function autoloaded. Note
#     that this need not include `-U' and `-z'.
#
# Note that no white space is allowed between the `#' and the rest of
# the string.
#
# Functions that are used to generate matches should return zero if they
# were able to add matches and non-zero otherwise.
#
# See the file `compdump' for how to speed up initialisation.

# If we got the `-d'-flag, we will automatically dump the new state (at
# the end).  This takes the dumpfile as an argument.  -d (with the
# default dumpfile) is now the default; to turn off dumping use -D.

# The -C flag bypasses both the check for rebuilding the dump file and the
# usual call to compaudit; the -i flag causes insecure directories found by
# compaudit to be ignored, and the -u flag causes all directories found by
# compaudit to be used (without security checking).  Otherwise the user is
# queried for whether to use or ignore the insecure directories (which
# means compinit should not be called from non-interactive shells).

emulate -L zsh
setopt extendedglob

typeset _i_dumpfile _i_files _i_line _i_done _i_dir _i_autodump=1
typeset _i_tag _i_file _i_addfiles _i_fail=ask _i_check=yes _i_name

while [[ $# -gt 0 && $1 = -[dDiuC] ]]; do
  case "$1" in
  -d)
    _i_autodump=1
    shift
    if [[ $# -gt 0 && "$1" != -[dfQC] ]]; then
      _i_dumpfile="$1"
      shift
    fi
    ;;
  -D)
    _i_autodump=0
    shift
    ;;
  -i)
    _i_fail=ign
    shift
    ;;
  -u)
    _i_fail=use
    shift
    ;;
  -C)
    _i_check=
    shift
    ;;
  esac
done

# The associative arrays containing the definitions for the commands and
# services.

typeset -gA _comps _services _patcomps _postpatcomps

# `_compautos' contains the names and options for autoloaded functions
# that get options.

typeset -gA _compautos

# The associative array use to report information about the last
# completion to the outside.

typeset -gA _lastcomp

# Remember dumpfile.
if [[ -n $_i_dumpfile ]]; then
  # Explicitly supplied dumpfile.
  typeset -g _comp_dumpfile="$_i_dumpfile"
else
  typeset -g _comp_dumpfile="${ZDOTDIR:-$HOME}/.zcompdump"
fi

# The standard options set in completion functions.

typeset -ga _comp_options
_comp_options=(
       bareglobqual
       extendedglob
       glob
       multibyte
       nullglob
       rcexpandparam
       unset
    NO_allexport
    NO_aliases
    NO_cshnullglob
    NO_cshjunkiequotes
    NO_errexit
    NO_globsubst
    NO_histsubstpattern
    NO_ignorebraces
    NO_ignoreclosebraces
    NO_kshglob
    NO_ksharrays
    NO_kshtypeset
    NO_markdirs
    NO_octalzeroes
    NO_shwordsplit
    NO_shglob
    NO_warncreateglobal
)

# And this one should be `eval'ed at the beginning of every entry point
# to the completion system.  It sets up what we currently consider a
# sane environment.  That means we set the options above, make sure we
# have a valid stdin descriptor (zle closes it before calling widgets)
# and don't get confused by user's ZERR trap handlers.

typeset -g _comp_setup='local -A _comp_caller_options;
             _comp_caller_options=(${(kv)options[@]});
             setopt localoptions localtraps ${_comp_options[@]};
             local IFS=$'\'\ \\t\\r\\n\\0\''
             exec </dev/null;
             trap - ZERR
             local -a reply
             local REPLY'

# These can hold names of functions that are to be called before/after all
# matches have been generated.

typeset -ga compprefuncs comppostfuncs
compprefuncs=()
comppostfuncs=()

# Loading it now ensures that the `funcstack' parameter is always correct.

: $funcstack

# This function is used to register or delete completion functions. For
# registering completion functions, it is invoked with the name of the
# function as it's first argument (after the options). The other
# arguments depend on what type of completion function is defined. If
# none of the `-p' and `-k' options is given a function for a command is
# defined. The arguments after the function name are then interpreted as
# the names of the command for which the function generates matches.
# With the `-p' option a function for a name pattern is defined. This 
# function will be invoked when completing for a command whose name 
# matches the pattern given as argument after the function name (in this
# case only one argument is accepted).
# The option `-P' is like `-p', but the function will be called after
# trying to find a function defined for the command on the line if no
# such function could be found.
# With the `-k' option a function for a special completion keys is 
# defined and immediately bound to those keys. Here, the extra arguments
# are the name of one of the builtin completion widgets and any number
# of key specifications as accepted by the `bindkey' builtin.
# In any case the `-a' option may be given which makes the function
# whose name is given as the first argument be autoloaded. When defining
# a function for command names the `-n' option may be given and keeps
# the definitions from overriding any previous definitions for the
# commands; with `-k', the `-n' option prevents compdef from rebinding
# a key sequence which is already bound.
# For deleting definitions, the `-d' option must be given. Without the
# `-p' option, this deletes definitions for functions for the commands
# whose names are given as arguments. If combined with the `-p' option
# it deletes the definitions for the patterns given as argument.
# The `-d' option may not be combined with the `-k' option, i.e.
# definitions for key function can not be removed.
#
# Examples:
#
#  compdef -a foo bar baz
#    make the completion for the commands `bar' and `baz' use the
#    function `foo' and make this function be autoloaded
#
#  compdef -p foo 'c*'
#    make completion for all command whose name begins with a `c'
#    generate matches by calling the function `foo' before generating
#    matches defined for the command itself
#
#  compdef -k foo list-choices '^X^M' '\C-xm'
#    make the function `foo' be invoked when typing `Control-X Control-M'
#    or `Control-X m'; the function should generate matches and will
#    behave like the `list-choices' builtin widget
#
#  compdef -d bar baz
#   delete the definitions for the command names `bar' and `baz'

compdef() {
  local opt autol type func delete eval new i ret=0 cmd svc
  local -a match mbegin mend

  emulate -L zsh
  setopt extendedglob

  # Get the options.

  if (( ! $# )); then
    print -u2 "$0: I need arguments"
    return 1
  fi

  while getopts "anpPkKde" opt; do
    case "$opt" in
    a)    autol=yes;;
    n)    new=yes;;
    [pPkK]) if [[ -n "$type" ]]; then
            # Error if both `-p' and `-k' are given (or one of them
	    # twice).
            print -u2 "$0: type already set to $type"
	    return 1
	  fi
	  if [[ "$opt" = p ]]; then
	    type=pattern
	  elif [[ "$opt" = P ]]; then
	    type=postpattern
	  elif [[ "$opt" = K ]]; then
	    type=widgetkey
	  else
	    type=key
	  fi
	  ;;
    d) delete=yes;;
    e) eval=yes;;
    esac
  done
  shift OPTIND-1

  if (( ! $# )); then
    print -u2 "$0: I need arguments"
    return 1
  fi

  if [[ -z "$delete" ]]; then
    # If the first word contains an equal sign, all words must contain one
    # and we define which services to use for the commands.

    if [[ -z "$eval" ]] && [[ "$1" = *\=* ]]; then
      while (( $# )); do
        if [[ "$1" = *\=* ]]; then
	  cmd="${1%%\=*}"
	  svc="${1#*\=}"
          func="$_comps[${_services[(r)$svc]:-$svc}]"
          [[ -n ${_services[$svc]} ]] &&
              svc=${_services[$svc]}
	  [[ -z "$func" ]] &&
	      func="${${_patcomps[(K)$svc][1]}:-${_postpatcomps[(K)$svc][1]}}"
          if [[ -n "$func" ]]; then
	    _comps[$cmd]="$func"
	    _services[$cmd]="$svc"
	  else
	    print -u2 "$0: unknown command or service: $svc"
	    ret=1
	  fi
	else
	  print -u2 "$0: invalid argument: $1"
	  ret=1
	fi
        shift
      done

      return ret
    fi

    # Adding definitions, first get the name of the function name
    # and probably do autoloading.

    func="$1"
    [[ -n "$autol" ]] && autoload -Uz "$func"
    shift

    case "$type" in
    widgetkey)
      while [[ -n $1 ]]; do
	if [[ $# -lt 3 ]]; then
	  print -u2 "$0: compdef -K requires <widget> <comp-widget> <key>"
	  return 1
	fi
	[[ $1 = _* ]] || 1="_$1"
	[[ $2 = .* ]] || 2=".$2"
        [[ $2 = .menu-select ]] && zmodload -i zsh/complist
	zle -C "$1" "$2" "$func"
	if [[ -n $new ]]; then
	  bindkey "$3" | IFS=$' \t' read -A opt
	  [[ $opt[-1] = undefined-key ]] && bindkey "$3" "$1"
	else
	  bindkey "$3" "$1"
	fi
	shift 3
      done
      ;;
    key)
      if [[ $# -lt 2 ]]; then
        print -u2 "$0: missing keys"
	return 1
      fi

      # Define the widget.
      if [[ $1 = .* ]]; then
        [[ $1 = .menu-select ]] && zmodload -i zsh/complist
	zle -C "$func" "$1" "$func"
      else
        [[ $1 = menu-select ]] && zmodload -i zsh/complist
	zle -C "$func" ".$1" "$func"
      fi
      shift

      # And bind the keys...
      for i; do
        if [[ -n $new ]]; then
	   bindkey "$i" | IFS=$' \t' read -A opt
	   [[ $opt[-1] = undefined-key ]] || continue
	fi
        bindkey "$i" "$func"
      done
      ;;
    *)
      # For commands store the function name in the
      # associative array, command names as keys.
      while (( $# )); do
        if [[ "$1" = -N ]]; then
          type=normal
        elif [[ "$1" = -p ]]; then
          type=pattern
        elif [[ "$1" = -P ]]; then
          type=postpattern
        else
          case "$type" in
          pattern)
	    if [[ $1 = (#b)(*)=(*) ]]; then
	      _patcomps[$match[1]]="=$match[2]=$func"
	    else
	      _patcomps[$1]="$func"
	    fi
            ;;
          postpattern)
	    if [[ $1 = (#b)(*)=(*) ]]; then
	      _postpatcomps[$match[1]]="=$match[2]=$func"
	    else
	      _postpatcomps[$1]="$func"
	    fi
            ;;
          *)
            if [[ "$1" = *\=* ]]; then
	      cmd="${1%%\=*}"
	      svc=yes
            else
	      cmd="$1"
	      svc=
            fi
            if [[ -z "$new" || -z "${_comps[$1]}" ]]; then
              _comps[$cmd]="$func"
	      [[ -n "$svc" ]] && _services[$cmd]="${1#*\=}"
	    fi
            ;;
          esac
        fi
        shift
      done
      ;;
    esac
  else
    # Handle the `-d' option, deleting.

    case "$type" in
    pattern)
      unset "_patcomps[$^@]"
      ;;
    postpattern)
      unset "_postpatcomps[$^@]"
      ;;
    key)
      # Oops, cannot do that yet.

      print -u2 "$0: cannot restore key bindings"
      return 1
      ;;
    *)
      unset "_comps[$^@]"
    esac
  fi
}

# Now we automatically make the definition files autoloaded.

typeset _i_wdirs _i_wfiles

_i_wdirs=()
_i_wfiles=()

autoload -Uz compaudit
if [[ -n "$_i_check" ]]; then
  typeset _i_q
  if ! eval compaudit; then
    if [[ -n "$_i_q" ]]; then
      if [[ "$_i_fail" = ask ]]; then
        if ! read -q \
"?zsh compinit: insecure $_i_q, run compaudit for list.
Ignore insecure $_i_q and continue [y] or abort compinit [n]? "; then
	  print -u2 "$0: initialization aborted"
          unfunction compinit compdef
          unset _comp_dumpfile _comp_secure compprefuncs comppostfuncs \
                _comps _patcomps _postpatcomps _compautos _lastcomp

          return 1
        fi
        _i_wfiles=()
	_i_wdirs=()
      else
        (( $#_i_wfiles )) && _i_files=( "${(@)_i_files:#(${(j:|:)_i_wfiles%.zwc})}"  )
        (( $#_i_wdirs ))  && _i_files=( "${(@)_i_files:#(${(j:|:)_i_wdirs%.zwc})/*}" )
      fi
    fi
    typeset -g _comp_secure=yes
  fi
fi

# Make sure compdump is available, even if we aren't going to use it.
autoload -Uz compdump compinstall

# If we have a dump file, load it.

_i_done=''

if [[ -f "$_comp_dumpfile" ]]; then
  if [[ -n "$_i_check" ]]; then
    IFS=$' \t' read -rA _i_line < "$_comp_dumpfile"
    if [[ _i_autodump -eq 1 && $_i_line[2] -eq $#_i_files &&
        $ZSH_VERSION = $_i_line[4] ]]
    then
      builtin . "$_comp_dumpfile"
      _i_done=yes
    fi
  else
    builtin . "$_comp_dumpfile"
    _i_done=yes
  fi
fi
if [[ -z "$_i_done" ]]; then
  typeset -A _i_test

  for _i_dir in $fpath; do
    [[ $_i_dir = . ]] && continue
    (( $_i_wdirs[(I)$_i_dir] )) && continue
    for _i_file in $_i_dir/^([^_]*|*~|*.zwc)(N); do
      _i_name="${_i_file:t}"
      (( $+_i_test[$_i_name] + $_i_wfiles[(I)$_i_file] )) && continue
      _i_test[$_i_name]=yes
      IFS=$' \t' read -rA _i_line < $_i_file
      _i_tag=$_i_line[1]
      shift _i_line
      case $_i_tag in
      (\#compdef)
	if [[ $_i_line[1] = -[pPkK](n|) ]]; then
	  compdef ${_i_line[1]}na "${_i_name}" "${(@)_i_line[2,-1]}"
	else
	  compdef -na "${_i_name}" "${_i_line[@]}"
	fi
	;;
      (\#autoload)
	autoload -Uz "$_i_line[@]" ${_i_name}
	[[ "$_i_line" != \ # ]] && _compautos[${_i_name}]="$_i_line"
	;;
      esac
    done
  done

  # If autodumping was requested, do it now.

  if [[ $_i_autodump = 1 ]]; then
    compdump
  fi
fi

# Rebind the standard widgets
for _i_line in complete-word delete-char-or-list expand-or-complete \
  expand-or-complete-prefix list-choices menu-complete \
  menu-expand-or-complete reverse-menu-complete; do
  zle -C $_i_line .$_i_line _main_complete
done
zle -la menu-select && zle -C menu-select .menu-select _main_complete

# If the default completer set includes _expand, and tab is bound
# to expand-or-complete, rebind it to complete-word instead.
bindkey '^i' | IFS=$' \t' read -A _i_line
if [[ ${_i_line[2]} = expand-or-complete ]] &&
  zstyle -a ':completion:' completer _i_line &&
  (( ${_i_line[(i)_expand]} <= ${#_i_line} )); then
  bindkey '^i' complete-word
fi

unfunction compinit compaudit
autoload -Uz compinit compaudit

return 0